
TTGO T Call
poesel/Power_DS3231_Adapter
A small adapter board to switch power with a DS3231 breakout board

A small adapter board to switch power with a DS3231 breakout board
Power DS3231 is an open-source printed circuit board by poesel, from the poesel/Power_DS3231_Adapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 30.5 × 20.3 mm with 10 parts on 9 nets, routed with 2 tracks and 0 vias.
It is built around the TXB0104RGYR. Its parts include 6 connectors, 1 resistor, 1 IC, 1 transistor and 1 switch. It belongs with the interfaces and adapters boards of this library.
An adapter to switch power with a DS3231 breakout board.
Empty board:
With parts:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 3.3V Supply | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | DS3231 Breakout | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | I2C Terminal 1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | I2C Terminal 2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Power In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Power Out | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | SW_Push_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | TXB0104RGY | Package_DFN_QFN:Texas_S-PVQFN-N14 | U1 |

poesel/Power_DS3231_Adapter
A small adapter board to switch power with a DS3231 breakout board

bitaxeorg/bitaxeMax
bitaxe based on the BM1397 ASIC from the Antminer S17


ckflight/FLIGHT_CONTROLLER_HARDWARE
SAM3X8E Peripheral rich flight controller pcb design


jeremypoulter/SmartishFairy
For detailed wiring diagrams, refer to the docs/wiring.md file in this repository.


nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.

PrinceYadav78/My_custom_miner
Mines crypto runs python pck bitaxetool to use this
It measures 30.5 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the TXB0104RGYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the poesel/Power_DS3231_Adapter repository on GitHub, at the commit this page was made from: the board is KiCAD Files Stripboard/Power DS3231.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).