2 layers157.5 × 30.5 mm
Tube Driver
median-dispersion/GMT-Geiger-Counter
Geiger-Müller tube based Geiger counter.
45 partsGPL-3.0
4 layers100 × 79 mm
AG-010-0100
ManojNU/PortfoliosPCB Portfolios
- Size
- 100 × 79 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 88
- Pads
- 415
- Tracks, vias
- 3,297, 145
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2022
- Updated
- 1 Sep 2022
Overview
AG-010-0100 is an open-source printed circuit board by ManojNU, from the ManojNU/Portfolios repository on GitHub. It is a 4-layer board of 100 × 79 mm with 106 parts on 88 nets, routed with 3,297 tracks and 145 vias.
It is built around the DRV8837DSGR-MS, SI7006-A20-IMR and FSA642UMX, with the LM393ADR, TXB0104RGYR and MMBT3904 among its other parts. Its parts include 31 capacitors, 30 resistors, 11 ICs, 5 diodes and 5 transistors.
Main components
12DRV8837DSGR-MS
WSON-8-EP(2x2)-40℃~+125℃ 1.5A 1.8V~7V 17nA 650mΩ Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHSMSKSEMIBrushed DC Motor Drivers
SI7006-A20-IMR
DFN-6(3x3)-40℃~+125℃ 0%RH~100%RH 1.9V~3.6V 12bit 150uA 5%RH Factory calibration、Built-in heater I2C ±1℃ DFN-6(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity Sensor
FSA642UMX
UFQFN-24(2.5x3.4)-40℃~+85℃ 1GHz 2.65V~4.3V 250ps 27ns 3 37ns 3:1 7pF 9.5Ω Bidirectional analog channel、Channel combination connection UFQFN-24(2.5x3.4) Analog Switches, Multiplexers ROHSonsemiAnalog Switches, Multiplexers
LM393ADR
SOP-8-18V~-1V、1V~18V 0℃~+70℃ 1.3us 2 2.5mA 250nA 2V~36V 2mV 36V 5nA SOP-8 Comparators ROHSUMWComparators
TXB0104RGYR
VQFN-14-EP(3.5x3.5)-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 4 Auto Direction Detection Bidirectional Tri-State VQFN-14-EP(3.5x3.5) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
150120BS75000
1206-40℃~+85℃ 105mW 140° 145mcd 20mA 3.5V 465nm 470nm Blue Discrete Diode Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLED Indication - DiscreteDSC6003CI2A-024.0000
OSC-SMD-40℃~+85℃ 1.8V~3.3V 24MHz SMD-4P Crystal Oscillators ROHSMicrochip TechnologyCrystal Oscillators
SFV24R-3STBE1HLF
SMD,P=0.5mm,卧贴FFC, FPC (Flat Flexible) Connector AssembliesAmphenolTL3780AF240QG
SMD,3x2mm-40℃~+85℃ 0.6mm 12V 2.4N 2mm 3mm 500,000 Cycles 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,3x2mm Tactile Switches ROHSE-SwitchTactile Switches150120RS75000
1206-40℃~+85℃ 140° 150mcd 2.4V 20mA 625nm 630nm 72mW Discrete Diode Red 1206 LED Indication - Discrete ROHSWürth ElektronikLED Indication - DiscreteESW-120-44-T-D
插件,P=2.54mm-55℃~+105℃ 18.67mm 2 2.54mm 2.54mm 20P 2x10P 4.57mm 5.7A 515V Phosphor bronze Square Hole Through Hole Tin Top 插件,P=2.54mm Female Headers ROHSSamtecFemale Headers
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | M9J_RLC.:C0603 | C1, C2, C3, C4, C16, C18, C19, C21, C23, C24, C25, C27, C28, C29, C30, C31 +1 |
| 13 | 1uF | M9J_RLC.:C0603 | C5, C6, C8, C9, C10, C11, C12, C13, C14, C15, C17, C20, C26 |
| 8 | 10K | M9J_RLC.:R0603 | R3, R4, R5, R16, R24, R25, R27, R30 |
| 8 | 2.2K | M9J_RLC.:R0603 | R12, R13, R14, R15, R17, R18, R19, R20 |
| 5 | 1K | M9J_RLC.:R0603 | R6, R7, R8, R21, R28 |
| 5 | Jumper_Sholder_2PinOpen | M9J_Connectors:JUMP_2PIN_OPEN | JP1, JP2, JP4, JP5, JP8 |
| 5 | MMBT3904 | M9J_Semiconductors.:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | HOLE | M9J_TP+MountHole+Fiducial.:HOLE_3MM | H1, H2, H3, H4 |
| 3 | 100R | M9J_RLC.:R0603 | R1, R2, R9 |
| 3 | AP7331-28WG-7 | M9J_PowerICs.:SOT-23-5 | U3, U5, U6 |
| 3 | Jumper_Sholder_3PinOpen | M9J_Connectors:JUMP_3PIN_OPEN | JP3, JP6, JP7 |
| 2 | 10R | M9J_RLC.:R0603 | R10, R11 |
| 2 | 150120BS75000 | M9J_Semiconductors.:LED_1206BLU | D2, D3 |
| 2 | 22R | M9J_RLC.:R0603 | R22, R26 |
| 2 | AP7331-18WG-7 | M9J_PowerICs.:SOT-23-5 | U4, U7 |
| 2 | DSC6003CI2A-024.0000 | M9J_Crystals:XTAL-4-3.2X2.5 | X1, X2 |
| 2 | IR_Switch | M9J_Electromechanical:IR_Switch | M1, M2 |
| 2 | SFV24R-3STBE1HLF | M9J_Sensors:OV5640 | J3, J4 |
| 2 | TL3780AF240QG | M9J_Switches:TACT_SMD_TL3780 | SW1, SW2 |
| 2 | VSMG285011G | M9J_Semiconductors.:LED-SMD-2-GULl-WING | D4, D5 |
| 1 | 10uF | M9J_RLC.:C0603 | C22 |
| 1 | 150120RS75000 | M9J_Semiconductors.:LED_1206RED | D1 |
| 1 | 3.3R | M9J_RLC.:R0603 | R29 |
| 1 | DRV8837DSGR | M9J_IntegratedCircuits.:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U11 |
| 1 | ESW-120-44-T-D | M9J_Modules.:nVidia-Jetson-nano | J1 |
| 1 | FSA642UMX | M9J_IntegratedCircuits.:UMLP-24-3.4X2.5 | U8 |
| 1 | LDR | M9J_Sensors:LDR_5.1x4.3_RM3.4 | R23 |
| 1 | LM393ADR | M9J_IntegratedCircuits.:SOIC-8_3.9x4.9_P1.27 | U10 |
| 1 | M50-3530242 | M9J_Connectors:PINHD-M1X2-P1.27-(M50-3530242) | J5 |
| 1 | PCA9543APW,118 | M9J_IntegratedCircuits.:TSSOP-14_4.4x5mm_P0.65mm | U9 |
| 1 | SFW15R-1STE1LF | M9J_Connectors:CON-1X15-P1-(SFW15R-1STE1LF) | J2 |
| 1 | SI7006-A20-IMR | M9J_Sensors:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U1 |
| 1 | TC33X-2-103E | M9J_RLC.:TC33X-2_TRIMPOT | RV1 |
| 1 | TXB0104RGY | M9J_IntegratedCircuits.:VQFN-14_EP | U2 |
Similar boards
- 2 layers19.6 × 24.1 mm
Moleblink
rjhsun/moleblink
ATtiny85-based illuminated PCB keychain featuring the Blacker House crest
31 parts2CC-BY-SA-4.0 - 2 layers44.4 × 33 mm
- 2 layers104.1 × 78.7 mm
- 6 layers105.6 × 100.9 mm
- 2 layers97.5 × 99 mm
- 4 layers76.2 × 101.6 mm
- 4 layers162 × 87 mm
Questions
How big is the AG-010-0100 PCB?
It measures 100 × 79 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AG-010-0100 use?
106 parts, built around the DRV8837DSGR-MS, SI7006-A20-IMR, FSA642UMX and LM393ADR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AG-010-0100 KiCad files?
From the ManojNU/Portfolios repository on GitHub, at the commit this page was made from: the board is OpenSource_Kicad/AG-010-0100.kicad_pcb and its schematic OpenSource_Kicad/1.Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AG-010-0100 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ManojNU before reusing the design.