

Ring illuminator
In situ Plankton Assemblage eXplorer
- Size
- 52.3 × 52.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 18
- Pads
- 33
- Tracks, vias
- 31, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Mar 2020
- Updated
- 12 Jan 2023
Overview
Ring illuminator is an open-source printed circuit board by plertvilai, from the plertvilai/IPAX repository on GitHub, published under the MIT licence. It is a 2-layer board of 52.3 × 52.3 mm with 23 parts on 18 nets, routed with 31 tracks and 0 vias.
It is built around the MCP9808-E/MS. Its parts include 17 connectors, 2 capacitors, 1 resistor and 1 IC.
Main components
1README
README.mdIn Situ Plankton Assemblage eXplorer

This Github repository contains all information necessary to build the In Situ Plankton Assemblage eXplorer (IPAX). Here is a brief introduction to how to utilize the repository.
Detailed Guide
A detail building guide is given in the Building Guide subfolder. Note that this guide is written in HTML format. To read it, simply download the entire folder and use a browser to open the file index.html.
Fabrication Files
There are two folders containing files that are necessary for IPAX fabrication.
- Mechanicals contains STL files that can be directly sent to a 3D printer to printout the mechanical parts. A STEP file is also included for users that are interested to develop the system further. The STEP file Assembly Rev02 Revised for BES v3.step contains CAD files of all the parts, including waterproof housing from Bluerobotics that can be opened with a CAD software for further development.
- PCBs contains all files for the printed circuit boards in the IPAX. Each subfolder is for each PCB, and the folder fabrication contains Gerber files that can be sent directly to PCB manufacturers. Each subfolder also contains KiCAD files that users can use to develop the PCBs for fit their needs.
Firmware
The folder Firmware contains all software for the IPAX.
Control Board
This subfolder contains Arduino (.ino) files that can be uploaded to the control board of the IPAX.
- full_control_alwaysON is the main routine for the control board that set the Raspberry Pi to always ON.
- full_control_interval is the main routine for the control board that turns the Raspberry Pi ON only at the specified time.
- rtc_set is a temporary code that can be uploaded to the control board to set the real-time clock.
Raspberry Pi
This subfolder contains Python files for the Raspberry Pi on the IPAX.
- connectArduino.py is a routine that allows the Raspberry Pi to communicate with the Arduino on the control board.
- ipaxClass.py is the library for the IPAX.
- ipaxDeploy.py is the main routine for deploying the IPAX.
- shutdowncheck.py is the control script that allows the Raspberry Pi to be properly shutdown with an external switch on the housing and the control board.
The configuration subfolder contains all the configuration files needed to configure that Raspberry Pi.
Bill of Materials
The folder BOM contains a single MS Excel file (.xlsx) that contains the detailed bill of materials of the IPAX.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Conn_01x01_Female | myLib:SCREW_4 | J1, J2, J3, J4, J5, J6, J7, J8, J14, J15, J16, J17 |
| 5 | Conn_01x01_Male | conn:small_smd_pad | J9, J10, J11, J12, J13 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Heatsink_Pad | led:HeatSink_10x10mm | HS1, HS2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | MCP9808 | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
More from plertvilai/IPAX
6- 2 layers45.7 × 66 mm

- 2 layers44.5 × 57.8 mm

- 2 layers44.5 × 57.8 mm

- 2 layers

- 2 layers37.8 × 50 mm

- 2 layers

Similar boards
- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 4 layers100 × 75 mm

OpenHW DevKit
openhwfoundation/core-v-mcu-devkit
This is the CORE-V MCU DevKit project, hosting the open-source artifacts for the CORE-V MCU Development Kit.
235 parts18 - 4 layers60 × 60 mm

- 4 layers42 × 42 mm

Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14 - 2 layers46 × 84 mm

- 4 layers105 × 38 mm

Printalyzer uvdensitometer
dektronics/printalyzer-uvdensitometer
UV/VIS Reflection and Transmission Densitometer for Photographic Darkroom Use
101 parts6 - 2 layers98.8 × 97.4 mm

NeOSensorV4 panel
fthiebolt/neOCampus-arduino
neOCampus Arduino | home of the neOSensors end-devices
278 parts5 - 2 layers100 × 100 mm

Questions
How big is the Ring illuminator PCB?
It measures 52.3 × 52.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ring illuminator use?
23 parts, built around the MCP9808-E/MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ring illuminator KiCad files?
From the plertvilai/IPAX repository on GitHub, at the commit this page was made from: the board is PCBs/Optics_holder/ring_illuminator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ring illuminator design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).