Skip to the content
2 layers37.8 × 50 mmPowerControl, the printed circuit board in 3D

PowerControl

plertvilai/IPAX7

In situ Plankton Assemblage eXplorer

Size
37.8 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
30
Pads
132
Tracks, vias
242, 31
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Mar 2020
Updated
12 Jan 2023

Overview

PowerControl is an open-source printed circuit board by plertvilai, from the plertvilai/IPAX repository on GitHub, published under the MIT licence. It is a 2-layer board of 37.8 × 50 mm with 38 parts on 30 nets, routed with 242 tracks and 31 vias.

It is built around the SMBJ5.0CA. Its parts include 12 resistors, 11 connectors, 7 transistors, 5 diodes and 2 capacitors.

Main components

1

README

README.md

In Situ Plankton Assemblage eXplorer

Image of IPAX

This Github repository contains all information necessary to build the In Situ Plankton Assemblage eXplorer (IPAX). Here is a brief introduction to how to utilize the repository.

Detailed Guide

A detail building guide is given in the Building Guide subfolder. Note that this guide is written in HTML format. To read it, simply download the entire folder and use a browser to open the file index.html.

Fabrication Files

There are two folders containing files that are necessary for IPAX fabrication.

  1. Mechanicals contains STL files that can be directly sent to a 3D printer to printout the mechanical parts. A STEP file is also included for users that are interested to develop the system further. The STEP file Assembly Rev02 Revised for BES v3.step contains CAD files of all the parts, including waterproof housing from Bluerobotics that can be opened with a CAD software for further development.
  2. PCBs contains all files for the printed circuit boards in the IPAX. Each subfolder is for each PCB, and the folder fabrication contains Gerber files that can be sent directly to PCB manufacturers. Each subfolder also contains KiCAD files that users can use to develop the PCBs for fit their needs.

Firmware

The folder Firmware contains all software for the IPAX.

Control Board

This subfolder contains Arduino (.ino) files that can be uploaded to the control board of the IPAX.

  1. full_control_alwaysON is the main routine for the control board that set the Raspberry Pi to always ON.
  2. full_control_interval is the main routine for the control board that turns the Raspberry Pi ON only at the specified time.
  3. rtc_set is a temporary code that can be uploaded to the control board to set the real-time clock.

Raspberry Pi

This subfolder contains Python files for the Raspberry Pi on the IPAX.

  1. connectArduino.py is a routine that allows the Raspberry Pi to communicate with the Arduino on the control board.
  2. ipaxClass.py is the library for the IPAX.
  3. ipaxDeploy.py is the main routine for deploying the IPAX.
  4. shutdowncheck.py is the control script that allows the Raspberry Pi to be properly shutdown with an external switch on the housing and the control board.

The configuration subfolder contains all the configuration files needed to configure that Raspberry Pi.

Bill of Materials

The folder BOM contains a single MS Excel file (.xlsx) that contains the detailed bill of materials of the IPAX.

Parts

38
QtyValueFootprintReferences
510kResistor_SMD:R_0603_1608MetricR4, R5, R6, R9, R21
4400RResistor_SMD:R_0603_1608MetricR2, R3, R8, R10
4Conn_01x01_MalemyLib:SCREW_4J4, J5, J6, J7
4SMBJ5.0CAmyLib:DO-214AAD1, D2, D4, D5
3Q_NMOS_GSDPackage_TO_SOT_SMD:SOT-23Q3, Q5, Q7
2470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2
2Conn_01x04_FemaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J9
2PMOSPackage_SON:Diodes_PowerDI3333-8Q1, Q6
10.01RResistor_SMD:R_1206_3216MetricR1
110RResistor_SMD:R_1206_3216MetricR7
120kResistor_SMD:R_0603_1608MetricR22
1Conn_01x03_FemaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1Conn_01x04_MaleConnector_Molex:Molex_Nano-Fit_105314-xx04_2x02_P2.50mm_HorizontalJ3
1Conn_01x04_MaleConnector_Molex:Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_VerticalJ11
1Conn_01x06_FemalemyLib:conn_1x06_1.5mmJ2
1Conn_01x06_MalemyLib:conn_1x06_1.5mmJ10
1MAX9938myLib:SOT-23-5U1
1NMOSPackage_SON:Diodes_PowerDI3333-8Q2
1NSI450-20AT1GDiode_SMD:D_SOD-123D3
1Q_PMOS_GSDPackage_TO_SOT_SMD:SOT-23Q4

More from plertvilai/IPAX

6
  • 2 layers45.7 × 66 mmNoPour, the printed circuit board in 3D

    NoPour

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    68 parts7MIT
  • 2 layers44.5 × 57.8 mmControlBoard rev05a, the printed circuit board in 3D

    ControlBoard rev05a

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    64 parts7MIT
  • 2 layers44.5 × 57.8 mmControl board, the printed circuit board in 3D

    Control board

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    63 parts7MIT
  • 2 layersRing illuminator, the printed circuit board in 3D

    Ring illuminator

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    24 parts7MIT
  • 2 layers52.3 × 52.3 mmRing illuminator, the printed circuit board in 3D

    Ring illuminator

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    23 parts7MIT

Similar boards

  • 2 layers56 × 56 mmPiPower v2, the printed circuit board in 3D

    PiPower v2

    wyolum/pi-power

    Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

    81 parts4MIT
  • 2 layers97.8 × 48 mmLAN tester, the printed circuit board in 3D

    LAN tester

    Otto17/LAN-tester

    Тестер витой пары на ATmega16A-AU

    65 parts2GPL-3.0
  • 2 layers53.5 × 45.5 mmNuled, the printed circuit board in 3D

    Nuled

    kimtore/wirelight

    LED strips powered by Arduino, Wi-Fi and MQTT.

    39 parts1MIT
  • 2 layers190 × 109 mmIOB v3.2.1, the printed circuit board in 3D

    IOB v3.2.1

    ADFTech/xtec-uc-ip-main-pcb

    KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.

    538 parts
  • 2 layers105 × 86 mmCCG UPDATED, the printed circuit board in 3D

    CCG UPDATED

    Alwinn07/Power-Distribution-Board-using-CCG30-48-05S-IC

    An isolated 30 W DC-DC power converter PCB based on the CCG30 module, featuring surge protection, EMI filtering, current limiting, reverse polarity protection, and robust power input circuitry.

    58 partsMIT
  • 2 layers97 × 100 mmPortadora, the printed circuit board in 3D

    Portadora

    jdavidguerrero/grooveforge-brain

    Boutique hybrid AI synthesizer — Teensy 4.1 + ESP32-S3 + discrete 2N3904 ladder filter.

    64 parts
  • 2 layers25.4 × 86 mmAudio jon FO1146A9E2145, the printed circuit board in 3D

    Audio jon FO1146A9E2145

    manhoosbilli1/tpa6110-stereo-amp-input-router

    Stereo audio amplifier (TPA6110A2) with 74AHC1G66 analog input switching and op-amp signal conditioning

    52 parts

Questions

How big is the PowerControl PCB?

It measures 37.8 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PowerControl use?

38 parts, built around the SMBJ5.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PowerControl KiCad files?

From the plertvilai/IPAX repository on GitHub, at the commit this page was made from: the board is PCBs/Power_regulator/powerControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PowerControl design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).