Skip to the content
12

SMBJ5.0CA

MDDExtended

-65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS

Part id
mdd/SMBJ5.0CA
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AA(SMB)
Pins
2
In stock
137,062 at JLCPCB (C113975)
Used on
12 open-source boards

Overview

The SMBJ5.0CA is an ESD And Surge Protection made by MDD in a DO-214AA(SMB) package with 2 pins. -65℃~+150℃ 5V 600W@10/1000us 65.3A@10/1000us 7V 800uA 9.2V Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 137,062 are in stock at JLCPCB (part C113975). 12 open-source boards in 11 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

Pinout

2
The pins of the SMBJ5.0CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

12See all 12
  • 2 layers56 × 56 mmPiPower v2, the printed circuit board in 3D

    PiPower v2

    wyolum/pi-power

    Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

    81 parts4MIT
  • 2 layers97.8 × 48 mmLAN tester, the printed circuit board in 3D

    LAN tester

    Otto17/LAN-tester

    Тестер витой пары на ATmega16A-AU

    65 parts2GPL-3.0
  • 2 layers53.5 × 45.5 mmNuled, the printed circuit board in 3D

    Nuled

    kimtore/wirelight

    LED strips powered by Arduino, Wi-Fi and MQTT.

    39 parts1MIT
  • 2 layers190 × 109 mmIOB v3.2.1, the printed circuit board in 3D

    IOB v3.2.1

    ADFTech/xtec-uc-ip-main-pcb

    KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.

    538 parts
  • 2 layers105 × 86 mmCCG UPDATED, the printed circuit board in 3D

    CCG UPDATED

    Alwinn07/Power-Distribution-Board-using-CCG30-48-05S-IC

    An isolated 30 W DC-DC power converter PCB based on the CCG30 module, featuring surge protection, EMI filtering, current limiting, reverse polarity protection, and robust power input circuitry.

    58 partsMIT
  • 2 layers97 × 100 mmPortadora, the printed circuit board in 3D

    Portadora

    jdavidguerrero/grooveforge-brain

    Boutique hybrid AI synthesizer — Teensy 4.1 + ESP32-S3 + discrete 2N3904 ladder filter.

    64 parts
  • 2 layers25.4 × 86 mmAudio jon FO1146A9E2145, the printed circuit board in 3D

    Audio jon FO1146A9E2145

    manhoosbilli1/tpa6110-stereo-amp-input-router

    Stereo audio amplifier (TPA6110A2) with 74AHC1G66 analog input switching and op-amp signal conditioning

    52 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMBJ5.0CA?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMBJ5.0CA?

DO-214AA(SMB), with 2 pins. Its footprint is drawn on this page.

Where is the SMBJ5.0CA datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SMBJ5.0CA?

JLCPCB lists it as part C113975, with 137,062 in stock; the sellers' links on this page open their listings.

What can replace the SMBJ5.0CA?

Parts like it in the library: the SMBJ5.0A by MDD, the SMBJ5.0A by hongjiacheng, the SMBJ5.0CA by hongjiacheng and the SMBJ5.0CA by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMBJ5.0CA?

12 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.