
PiPower v2 bak
wyolum/pi-power
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.
PiPower v2 is an open-source printed circuit board by wyolum, from the wyolum/pi-power repository on GitHub, published under the MIT licence. It is a 2-layer board of 56 × 56 mm with 81 parts on 71 nets, routed with 592 tracks and 15 vias.
It is built around the TPS61200DRC, TPS62163DSG and MAX17040G+T, with the MCP73831, TPS2115APW and NANOSMDC110F-2 among its other parts. Its parts include 22 resistors, 18 capacitors, 14 connectors, 7 diodes and 5 ICs. It belongs with the power and sensors and measurement boards of this library.
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | c_0805 | C1, C4, C7, C8, C11, C12, C13, C16 |
| 7 | 10uF X7R | c_1206 | C2, C5, C6, C9, C10, C14, C18 |
| 4 | 2k2 | r_0805 | R1, R2, R6, R9 |
| 3 | 100k | r_0805 | R5, R19, R20 |
| 3 | 10k | r_0805 | R16, R17, R18 |
| 2 | 1k | r_0805 | R14, R21 |
| 2 | 1uF | c_0805 | C15, C17 |
| 2 | 220k | r_0805 | R12, R13 |
| 2 | 2M | r_0805 | R4, R8 |
| 2 | MH | vite_3mm | H1, H2 |
| 1 | 12V_Out | Header2x2 | J11 |
| 1 | 150E | r_0805 | R15 |
| 1 | 1k5 | r_0805 | R11 |
| 1 | 22uF X7R | c_1210 | C3 |
| 1 | 2k | r_0805 | R3 |
| 1 | 2u2H,1.9A | Inductor_SMD2 | L2 |
| 1 | 300k | r_0805 | R22 |
| 1 | 470E | r_0805 | R10 |
| 1 | 470k | r_0805 | R23 |
| 1 | 4u7H,1.2A | Inductor_SMD1 | L1 |
| 1 | 5V_BAT | Header_2 | J9 |
| 1 | 5V_EXT | Header_2 | J6 |
| 1 | 5V_IN | Header_3 | J12 |
| 1 | 5V_OUT | led_0805 | D7 |
| 1 | 5V_OUT | ShortLink | SJ2 |
| 1 | 5V_OUT | Header_2 | J7 |
| 1 | 5V_Pi | Header_2 | J10 |
| 1 | 5V_Pi | ShortLink | SJ6 |
| 1 | 5V_Pi | led_0805 | D8 |
| 1 | 5V_USB | Header_2 | J5 |
| 1 | Auto_On | Header_3 | J4 |
| 1 | BAT | ShortLink | SJ1 |
| 1 | BAT | led_0805 | D6 |
| 1 | CHG | led_0805 | D4 |
| 1 | D0 | ShortLink | SJ3 |
| 1 | D1 | ShortLink | SJ4 |
| 1 | DIS | led_0805 | D3 |
| 1 | IRF7319 | SO8E | Q2 |
| 1 | LSM115J | diode-DO214BA | D9 |
| 1 | LiPo_JST | CONN_JST-2_SMD | J2 |
| 1 | MAX17040 | MAX17040_TDFN | U5 |
| 1 | MCP73831 | MCP73831 | U1 |
| 1 | MicroUSB_in | USB_B_Micro | J1 |
| 1 | NANOSMDC110F | f_1206 | F1 |
| 1 | ON_OFF | SW_PB_V_H | SW1 |
| 1 | PCB | PCB | PCB1 |
| 1 | RASPI_GPIO | Header_GPIO_3 | P1 |
| 1 | SMBJ5.0CA | diode-DO214AA | D2 |
| 1 | STAT | ShortLink2 | SJ5 |
| 1 | TP | Breakout | TP1 |
| 1 | TPS2115A | TPS2115_SON | U3 |
| 1 | TPS61200 | TPS61200_QFN10 | U4 |
| 1 | TPS62163 | TPS62163_DSG | U2 |
| 1 | USB_A_out | USB_A | J3 |
| 1 | VBAT | Header_2 | J8 |
| 1 | V_IN | JACK_ALIM | P2 |

wyolum/pi-power
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

joakimwennergren/Smartwatch
This project is the development of a next-generation smartwatch designed for both style and functionality. Powered by FreeRTOS, it offers a responsive, real-time operating environment optimized for wearable technology.






ADFTech/xtec-uc-ip-main-pcb
KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.

Alwinn07/Power-Distribution-Board-using-CCG30-48-05S-IC
An isolated 30 W DC-DC power converter PCB based on the CCG30 module, featuring surge protection, EMI filtering, current limiting, reverse polarity protection, and robust power input circuitry.
It measures 56 × 56 mm and has 2 copper layers, 1.6 mm thick.
81 parts, built around the TPS61200DRC, TPS62163DSG, MAX17040G+T and MCP73831. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wyolum/pi-power repository on GitHub, at the commit this page was made from: the board is PiPower_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).