Skip to the content
2 layers38.5 × 34.3 mmEsp webcam, the printed circuit board in 3D
Size
38.5 × 34.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
48
Pads
110
Tracks, vias
118, 10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Nov 2026
Updated
7 Nov 2026

Overview

Esp webcam is an open-source printed circuit board by pj-hoakari, from the pj-hoakari/esp-edge-device repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 38.5 × 34.3 mm with 11 parts on 48 nets, routed with 118 tracks and 10 vias.

It is built around the ESP32-S3-WROOM-1-N8R8, AZ1117CH-3.3TRG1 and CL21A226MAQNNNE, with the TYPE-C-31-M-12 and USB1046-GF-0190-L-B-A among its other parts. Its parts include 4 capacitors, 3 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

5

Parts

11
QtyValueFootprintReferences
25.1kResistor_SMD:R_0603_1608MetricR2, R3
1100nFCapacitor_SMD:C_0603_1608MetricC2
110kResistor_SMD:R_0603_1608MetricR1
11uFCapacitor_SMD:C_0603_1608MetricC3
12.2uFCapacitor_SMD:C_0603_1608MetricC1
122uFCapacitor_SMD:C_0805_2012MetricC4
1AZ1117CH-3.3TRG1Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1ESP32-S3-WROOM-1-N8R8RF_Module:ESP32-S3-WROOM-1U1
1TYPE-C-31-M-12Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2
1USB1046-GF-0190-L-B-AConnector_USB:USB_A_Receptacle_GCT_USB1046J1

Similar boards

  • 4 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    139 parts189MIT
  • 4 layers90 × 66 mmIron node, the printed circuit board in 3D

    Iron node

    enkhbold470/iron-node

    ESP32-S3 industrial gateway: W5500 Ethernet, isolated RS-485 (ADM2587E), CAN, 9-36 V input. 4-layer KiCad 10 board.

    83 partsCERN-OHL-S-2.0
  • 4 layers100 × 80 mmPd brick, the printed circuit board in 3D

    Pd brick

    enkhbold470/pd-brick

    USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.

    120 partsCERN-OHL-S-2.0
  • 2 layers55.2 × 53 mmAmiga-2000-usb kb stamp, the printed circuit board in 3D

    Amiga-2000-usb kb stamp

    wiretap-retro/A2000-USB-Keyboard-Adapter-RP2040

    A USB keyboard adapter for the Amiga 2000 based on the Pi Stamp RP2040

    14 parts11
  • 4 layers100 × 100 mmKvm switch, the printed circuit board in 3D

    Kvm switch

    Rithvik-Vadlamani/kvm-switch

    Four-layer HDMI/USB KVM design with STM32 firmware, supply supervision, and verification evidence

    170 parts
  • 2 layers124.5 × 68.6 mmOmnicontroller, the printed circuit board in 3D

    Omnicontroller

    rp958/omnicontroller

    OmniController is an all-in-one controller designed with retrogaming solutions in mind.

    53 partsCERN-OHL-S-2.0
  • 2 layers84.5 × 90.2 mmSYNCHRO Zentrale, the printed circuit board in 3D

    SYNCHRO Zentrale

    h07jonas/SYNCHRO

    SYNCHRO System for Yielding Networked CHannel Rail Operation SYNCHRO is a modular, high-performance digital model railroad control ecosystem architecture based on the DCC (Digital Command Control) standard.

    56 parts1
  • 4 layers43.9 × 41 mmCapteur, the printed circuit board in 3D

    Capteur

    RubisCatty/Serre-Connecte

    Projet final du programme de Génie Électrique par Sonia Michaud

    43 parts

Questions

How big is the Esp webcam PCB?

It measures 38.5 × 34.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp webcam use?

11 parts, built around the ESP32-S3-WROOM-1-N8R8, AZ1117CH-3.3TRG1, CL21A226MAQNNNE and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp webcam KiCad files?

From the pj-hoakari/esp-edge-device repository on GitHub, at the commit this page was made from: the board is esp_webcam.kicad_pcb and its schematic esp_webcam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp webcam design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).