Skip to the content
2 layers209.8 × 307.1 mmRobocup PCB, the printed circuit board in 3D
Size
209.8 × 307.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
132
Pads
291
Tracks, vias
480, 52
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Jan 2021
Updated
8 Mar 2022

Overview

Robocup PCB is an open-source printed circuit board by Pixeljoch, from the Pixeljoch/Robocup_PCB repository on GitHub. It is a 2-layer board of 209.8 × 307.1 mm with 59 parts on 132 nets, routed with 480 tracks and 52 vias.

It is built around the TSSP93038, 1N5347B and IRF9540NS, with the XT60-M among its other parts. Its parts include 16 resistors, 13 capacitors, 5 ICs, 5 connectors and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

59
QtyValueFootprintReferences
120.1uFCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12
126k2Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
12TSSP93038Robocup_PCB:IR_TSOP93038_THIR1, IR2, IR3, IR4, IR5, IR6, IR7, IR8, IR9, IR10, IR11, IR12
3SS ESP101Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW_ARD, SW_M, SW_P
3TB6612FNG_MODRobocup_PCB:U_TB6612FNG_MODU1, U2, U5
2680RResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR14, R15
1100kResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR13
110nCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC13
112V_S18V20F12Robocup_PCB:12_S18V20F12_FPU4
1180RResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR16
11N5347BDiode_THT:D_DO-201_P15.24mm_HorizontalD1
15V_D24V5F5Robocup_PCB:5V_D24V5F5_FPU3
1Arduino_Mega_Headerw_conn_misc:arduino_mega_headerJ4
1BLUELED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4
1GREENLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1IRF9540NPackage_TO_SOT_SMD:TO-263-2Q1
1M1_INConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ1
1M2_INConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1M3_INConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3
1REDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3
1XT60-M3rd party libs:AMASS_XT60-MJ8

More from Pixeljoch/Robocup_PCB

4
  • 2 layers81.7 × 37.5 mmLight Ring PCB, the printed circuit board in 3D

    Light Ring PCB

    Pixeljoch/Robocup_PCB

    126 parts
  • 4 layers120 × 140 mmRobocup PCB, the printed circuit board in 3D

    Robocup PCB

    Pixeljoch/Robocup_PCB

    84 parts
  • 2 layers210.4 × 166.1 mmIR Board, the printed circuit board in 3D

    IR Board

    Pixeljoch/Robocup_PCB

    73 parts

Similar boards

  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 2 layers120 × 100 mmRoot, the printed circuit board in 3D

    Root

    GonzaCerv/noah-hardware

    This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

    127 parts28MIT
  • 2 layers110 × 110 mmMs pcb, the printed circuit board in 3D

    Ms pcb

    opatiny/micromouse

    Designing a custom micromouse robot.

    39 parts15CERN-OHL-P-2.0
  • 2 layersPlaca alimentacao, the printed circuit board in 3D

    Placa alimentacao

    edromufu/edromufu

    Repositório da EDROM-UFU destinado ao desenvolvimento do projeto humanoide para participação nas competições LARC e ROBOCUP.

    26 parts9MIT
  • 2 layers107.9 × 63.2 mmTeam2(10-30), the printed circuit board in 3D

    Team2(10-30)

    RoboJackets/robowrestling

    Autonomous 3kg sumo

    116 parts9MIT
  • 2 layers99.5 × 67 mmController Board, the printed circuit board in 3D

    Controller Board

    kairobyte/bipedal_self_balance

    A bipedal self balancing robot with 2DOF in each leg. Built from scratch.

    23 parts7MIT
  • 4 layers65.8 × 77.2 mmVtx scanner pcb, the printed circuit board in 3D

    Vtx scanner pcb

    deets/deets-fpv-vtx-scanner

    39 parts5
  • 2 layers151.3 × 122.6 mmRemote v2, the printed circuit board in 3D

    Remote v2

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    135 parts4MIT

Questions

How big is the Robocup PCB PCB?

It measures 209.8 × 307.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robocup PCB use?

59 parts, built around the TSSP93038, 1N5347B, IRF9540NS and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robocup PCB KiCad files?

From the Pixeljoch/Robocup_PCB repository on GitHub, at the commit this page was made from: the board is OLD/Robocup_PCB.kicad_pcb and its schematic IR_Board/IR_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robocup PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Pixeljoch before reusing the design.