2 layers54.8 × 34 mm
GR HV5222 Breakout
GadgetReboot/HV5222_Breakout
HV5222 32 bit shift register breakout board
27 partsCC-BY-SA-4.0
4 layers189 × 55 mm
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.
- Size
- 189 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 145
- Pads
- 381
- Tracks, vias
- 825, 130
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Sep 2024
- Updated
- 23 Oct 2024
Overview
Nixie is an open-source printed circuit board by pimborman, from the pimborman/nixie-clock repository on GitHub. It is a 4-layer board of 189 × 55 mm with 70 parts on 145 nets, routed with 825 tracks and 130 vias.
It is built around the ATMEGA328P-PU, MC34063AP and HV5222PG-G, with the DS3231MZ/V+, IRF644 and UF4007 among its other parts. Its parts include 23 resistors, 15 capacitors, 7 ICs, 3 diodes and 2 transistors. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MC34063AP
PDIP-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No PDIP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
HV5222PG-G
PQFP-44(10x10)-40℃~+85℃ 1 10.8V~13.2V 32 Open-drain Output enable、Supports forward and reverse shift Serial-to-Parallel PQFP-44(10x10) Shift Registers ROHSMicrochip TechnologyShift Registers
DS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
IRF644
TO-220AB-55℃~+150℃ 1 N-channel 1.3nF 125W 14A 250V 280mΩ@10V 320pF 4V 59nC@10V 69pF N-Channel TO-220AB MOSFETsTexas InstrumentsMOSFETs
UF4007
DO-41-50℃~+150℃ 1.7V@1A 1A 1kV 30A 5uA@1kV 75ns DO-41 Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes
README
README.mdDescription
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 9 | 0.1u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C3, C4, C6, C7, C8, C10, C11, C14 |
| 6 | IN-14 | nixie:nixies-us-IN-14 | N1, N2, N3, N4, N5, N6 |
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R18, R19, R20, R21 |
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R15, R17, R22 |
| 4 | IN-3 | nixie:nixies-us-IN-3 | N7, N8, N9, N10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 0.01u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C12, C13, C15 |
| 2 | HV5222PG-G | Package_QFP:PQFP-44_10x10mm_P0.8mm | U3, U5 |
| 1 | 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 100u | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | nixie:Potentiometer_Bourns_3306P_Vertical | RV1 |
| 1 | 220 | Diode_THT:D_DO-15_P10.16mm_Horizontal | D3 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C9 |
| 1 | 4504 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | 470p | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2 |
| 1 | 750k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U6 |
| 1 | Barrel_Jack | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Battery_Cell | nixie:BH-80B-1 | BT1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | IRF644 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U4 |
| 1 | MC34063AP | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | RotaryEncoder_Switch | nixie:PEC11H4020FS0016 | SW1 |
| 1 | UF4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
Questions
How big is the Nixie PCB?
It measures 189 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Nixie use?
70 parts, built around the ATMEGA328P-PU, MC34063AP, HV5222PG-G and DS3231MZ/V+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nixie KiCad files?
From the pimborman/nixie-clock repository on GitHub, at the commit this page was made from: the board is nixie.kicad_pcb and its schematic controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nixie design in my own project?
Its repository states no licence, so its author keeps all rights: ask pimborman before reusing the design.
Similar boards
- 2 layers50.8 × 44.4 mm
NixiePowerSupply
CarlRaymond/NixiePowerSupply
A KiCad project for a high-voltage Nixie tube power supply.
21 parts - 2 layers100 × 50 mm
Nixie control board
alxhoff/Nixie-tube-clock
Firmware for a nixie tube clock based on STM32 hal libraries
43 parts1GPL-3.0 - 4 layers65 × 33 mm
- 4 layers240 × 70 mm
- 2 layers127 × 45.7 mm
- 2 layers63.8 × 75 mm
- 2 layers54.5 × 38.3 mm
