

Solo nixie
A tiny single nixie tube clock, for LD995a or IN-16
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 49
- Pads
- 138
- Tracks, vias
- 292, 44
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Dec 2021
- Updated
- 13 Dec 2021
Overview
Solo nixie is an open-source printed circuit board by pierre-muth, from the pierre-muth/solo-nixie repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 39 parts on 49 nets, routed with 292 tracks and 44 vias.
It is built around the MMBTA42 and CPH3459-TP. Its parts include 16 resistors, 12 transistors, 2 capacitors, 2 switches and 1 IC. It belongs with the lEDs and displays boards and the PIC boards of this library.
Main components
2README
README.mdsolo-nixie
A tiny single nixie tube clock, for LD995a or IN-16. USB powered, DS3231 RTC, built-in power-supply.
Details here https://pierremuth.wordpress.com/2021/12/11/a-cute-little-single-tube-nixie-clock/

Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | solo-nixie:0805_HandSoldering | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 11 | MMBTA42 | solo-nixie:SOT-23 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 2 | 0 | solo-nixie:0805_HandSoldering | R15, R16 |
| 2 | SW_Push | solo-nixie:SW_SPST_EVQP7A | SW1, SW2 |
| 1 | 100K | solo-nixie:0805_HandSoldering | R2 |
| 1 | 10uH | solo-nixie:L_3216Metric | L1 |
| 1 | 1M | solo-nixie:0805_HandSoldering | R1 |
| 1 | 1nF | solo-nixie:0805_HandSoldering | C1 |
| 1 | 1uF | solo-nixie:0805_HandSoldering | C2 |
| 1 | CPH3459 | solo-nixie:CPH3 | Q1 |
| 1 | D | solo-nixie:D_3220 | D1 |
| 1 | ICSP | solo-nixie:PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | Nixie_0-9P | solo-nixie:LD8007 | N1 |
| 1 | PIC16F18346-GZ | solo-nixie:UQFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm | U1 |
| 1 | RTC | solo-nixie:Pin_Header_RTC_5x2.54mm_SMD | RTC |
| 1 | USB_B_Micro | solo-nixie:USB_Micro-B_Wuerth-629105150521_CircularHoles | USB |
Similar boards
- 2 layers85 × 56.5 mm

- 2 layers120 × 70 mm

BRNG
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas
93 parts37 - 2 layers70 × 40 mm

- 2 layers137.2 × 30.5 mm

Panaplex
74hc595/Panaplex-Clock
Code/schematics for a clock using a Panaplex (planar gas discharge) display
30 parts12BSD-3-Clause - 2 layers168.8 × 95.8 mm

- 4 layers58 × 58 mm

- 2 layers240 × 38.7 mm

ETAclock
drkmsmithjr/ETANixieClock
An Estimated Time of Arrival Nixie Tube Clock Open Source Hardware Project
126 parts6 - 2 layers94.5 × 100 mm

BatProtect
flatmax/BatteryController.electronics
networked home micro battery controller - electronics
55 parts5
Questions
What parts does the Solo nixie use?
39 parts, built around the MMBTA42 and CPH3459-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solo nixie KiCad files?
From the pierre-muth/solo-nixie repository on GitHub, at the commit this page was made from: the board is kicad/solo-nixie/solo-nixie.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solo nixie design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).