4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
4 layers26.7 × 26.7 mm
SiPM Pixel
pierre-muth/cosmic-pixels2code and files of the cosmic-pixels project on piermuth.com
- Size
- 26.7 × 26.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 27
- Pads
- 107
- Tracks, vias
- 335, 39
- Pours
- 113
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Jan 2025
- Updated
- 29 Jul 2026
Overview
SiPM Pixel is an open-source printed circuit board by pierre-muth, from the pierre-muth/cosmic-pixels repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 26.7 × 26.7 mm with 28 parts on 27 nets, routed with 335 tracks and 39 vias.
It is built around the LMV793MF and WS2812B. Its parts include 8 resistors, 5 diodes, 5 connectors, 4 capacitors and 2 ICs. It belongs with the PIC boards of this library.
Main components
2
LMV793MF
SOT-23-5-40℃~+125℃ 0.01pA 0.1pA 1 1.15mA 1.8V~5.5V 100uV 1uV/℃ 32V/us 35mA 5.8nV/√Hz@1kHz 88MHz 94dB Decompensated stable Rail-to-rail output SOT-23-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdcosmic-pixels
Code and files of the cosmic-pixels project on www.pierremuth.com
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3, J4 |
| 4 | TestPoint | SiPM_Pixel_footprint:TestPoint_Pad_1x1mm | b4, b5, b6, b7 |
| 3 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4 |
| 3 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R9 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 100 | SiPM_Pixel_footprint:R_0805_and_5x5Pot_HandSolder | R5 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | Conn_01x03_Pin | SiPM_Pixel_footprint:PinHeader_1x03_P2.54mm_Vertical_small_ring | J5 |
| 1 | D | SiPM_Pixel_footprint:D_0805_2012_long_HandSolder | D1 |
| 1 | D_SiPM | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | D2 |
| 1 | LMV793 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | PIC16F18325-xGZ | SiPM_Pixel_footprint:UQFN-20-1EP_4x4mm_P0.5mm_easy_solder | U2 |
| 1 | WS2812B | SiPM_Pixel_footprint:LED_WS2812B_5.0x5.0mm_3Pin | D3 |
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
Questions
How big is the SiPM Pixel PCB?
It measures 26.7 × 26.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SiPM Pixel use?
28 parts, built around the LMV793MF and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SiPM Pixel KiCad files?
From the pierre-muth/cosmic-pixels repository on GitHub, at the commit this page was made from: the board is KiCAD-SiPM-Pixel/SiPM_Pixel.kicad_pcb and its schematic KiCAD-SiPM-Pixel/SiPM_Pixel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SiPM Pixel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).