Skip to the content
2 layers25.1 × 36.3 mmSub pcb, the printed circuit board in 3D
Size
25.1 × 36.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
8
Pads
25
Tracks, vias
33, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Feb 2026
Updated
18 Jun 2026

Overview

Sub pcb is an open-source printed circuit board by pienchandayo, from the pienchandayo/Split_keyboard_analog_pad repository on GitHub. It is a 2-layer board of 25.1 × 36.3 mm with 13 parts on 8 nets, routed with 33 tracks and 0 vias.

It is built around the 1N4148WT. Its parts include 1 diode, 1 connector and 1 switch.

Main components

1

Parts

13
QtyValueFootprintReferences
7TestPointTestPoint:TestPoint_Pad_1.5x1.5mmBTN1, COL1, GND1, ROW1, VCC1, X1, Y1
11N4148WTDiode_SMD:D_SOD-523D1
1Conn_01x05_Pinanalog_pad:Switch_joy_padJ1
1SW_PushPCM_Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.00uSW1

The 10 most common of 13 parts.

More from pienchandayo/Split_keyboard_analog_pad

2

Similar boards

  • 2 layers181 × 97 mmOpenDeck r3.1.2, the printed circuit board in 3D

    OpenDeck r3.1.2

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    262 parts960Apache-2.0
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 4 layers65 × 56.5 mmSH RPi, the printed circuit board in 3D

    SH RPi

    hatlabs/SH-RPi-hardware

    Sailor Hat for Raspberry Pi hardware design files

    168 parts56
  • 2 layers59.6 × 42 mmMacropad synthplug mk2, the printed circuit board in 3D

    Macropad synthplug mk2

    todbot/macropadsynthplug

    Turn StemmaQT port by into Audio Out + MIDI In

    43 parts53CC0-1.0
  • 4 layers47 × 39.5 mmStealthburner Toolhead PCB, the printed circuit board in 3D

    Stealthburner Toolhead PCB

    acha666/RP2040_ToolheadPCB_SB

    A Toolhead PCB for VORON StealthBurner based on RP2040

    145 parts43GPL-3.0
  • 2 layers271.8 × 103.9 mmHotswap ble, the printed circuit board in 3D

    Hotswap ble

    ebastler/cornholius

    ZMK-based replacement PCB for Cornelius keyboard

    146 parts37
  • 2 layers275.5 × 92 mmOlice, the printed circuit board in 3D

    Olice

    floookay/olice

    The olice is 40% alice-like ortho keyboard. It features two board extension modules that can be magnetically attached on the sides.

    115 parts33
  • 4 layers35.5 × 14.5 mmComplete v1.0, the printed circuit board in 3D

    Complete v1.0

    drpykachu/Sonar-Watch

    A self-designed, home-made watch intended to tell time in a funky and unique way!

    225 parts23

Questions

How big is the Sub pcb PCB?

It measures 25.1 × 36.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sub pcb use?

13 parts, built around the 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sub pcb KiCad files?

From the pienchandayo/Split_keyboard_analog_pad repository on GitHub, at the commit this page was made from: the board is Split_keyboard_analog_pad/sub_pcb_R/sub_pcb.kicad_pcb and its schematic Split_keyboard_analog_pad/Split_keyboard_analog_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sub pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask pienchandayo before reusing the design.