Skip to the content
4 layers47 × 90 mmPicoLume v4, the printed circuit board in 3D

Hardware designs for the PicoLume wireless LED prop system. All designs are created in KiCad.

Size
47 × 90 mm
Copper layers
4
Thickness
1.6 mm
Parts
102
Nets
102
Pads
400
Tracks, vias
918, 128
Pours
16
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Dec 2025
Updated
11 Aug 2026

Overview

PicoLume v4 is an open-source printed circuit board by picolume, from the picolume/hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 47 × 90 mm with 102 parts on 102 nets, routed with 918 tracks and 128 vias.

It is built around the 74AHCT1G125SE, AP63203WU and AP63205WU, with the W25Q128JVSIQ, MSD-4-A and BQ25185DLHR among its other parts. Its parts include 28 capacitors, 18 resistors, 14 connectors, 9 ICs and 4 switches. It belongs with the RP2350 boards of this library.

Main components

8

README

README.md

PicoLume Hardware

Hardware designs for the PicoLume wireless LED prop system. All designs are created in KiCad.

Design Series

series-prop (Primary)

The primary hardware design for production use. Contains the PicoLume Board - a compact control board designed to be installed on each prop in a synchronized LED light show.

Current Design: receiver-v1

An RP2040-based control board featuring:

  • RP2040 microcontroller with 16MB flash (W25Q16JVS)
  • RFM69HCW radio module (915 MHz) for wireless timecode reception
  • USB-C connector for programming and show file upload
  • Dual power input with automatic switching (LM66200)
  • 5V buck converter (AP63205WU) for LED strip power
  • Pinout for 0.91" OLED display (I2C)
  • Screw terminals for LED strip connection (WS2812B)
  • Level shifter (74AHCT1G125) for reliable LED data signal
  • Three tactile buttons for configuration
  • Onboard WS2812B status LED
  • Four M3 mounting holes

The PicoLume Board is the core control component. A complete receiver or transmitter setup requires additional hardware (enclosures, power supplies, antennas, etc.) which are currently being designed.

series-legacy (Prototypes)

Early prototype designs from the development phase. These boards were used for proof-of-concept testing and firmware development.

Note: These designs are prototypes and are not suited for production use.

VersionDescription
v1Initial RFM69-based design
v2RP2040 with Pi Pico footprint
v3Refined RP2040 design
v4RP2350 Experiment

Related Repositories

  • firmware/ - Arduino firmware for receiver and remote devices

License

See LICENSE for details.

Parts

102
QtyValueFootprintReferences
11100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C7, C8, C11, C19, C24
722uCapacitor_SMD:C_0805_2012MetricC15, C16, C17, C20, C21, C22, C25
610kResistor_SMD:R_0603_1608Metric10k, 10k, R24, R25, R29, R30
42.2kResistor_SMD:R_0603_1608Metric2.2k, 2.2k, R9, R13
44.7uCapacitor_SMD:C_0603_1608MetricC9, C10, C12, C28
4LEDLED_SMD:LED_0603_1608MetricCHG1, D1, D2, Fault1
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
4SW_Pushfootprints:FSMHSW1, SW2, SW3, SW4
3100kResistor_SMD:R_0603_1608MetricR14, R17, R21
31kResistor_SMD:R_0603_1608MetricR1, R4, R6
215pCapacitor_SMD:C_0603_1608MetricC13, C14
2220Resistor_SMD:R_0603_1608MetricR15, R31
227Resistor_SMD:R_0603_1608MetricR7, R8
24.7uInductor_SMD:L_1210_3225MetricL2, L3
25.1kResistor_SMD:R_0603_1608MetricR18, R19
2600Resistor_SMD:R_0603_1608MetricR26, R27
2Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2, J13
2Conn_01x18_PinConnector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ1, J3
2Cut to DisconnectJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1, JP2
110KResistor_SMD:R_0603_1608MetricR10
110uCapacitor_SMD:C_1206_3216MetricC23
110uCapacitor_SMD:C_0805_2012MetricC18
110uCapacitor_SMD:C_0603_1608MetricC27
113kResistor_SMD:R_0603_1608MetricR28
11uHInductor_SMD:L_1210_3225MetricL4
13.3ufootprints:AOTAB201610S3R3101TL1
133Resistor_SMD:R_0603_1608MetricR5
147uCapacitor_SMD:C_1206_3216MetricC26
1723kResistor_SMD:R_0603_1608MetricR16
174AHCT1G125footprints:SOT-25U6
1AP63203WUPackage_TO_SOT_SMD:TSOT-23-6U5
1AP63205WUPackage_TO_SOT_SMD:TSOT-23-6U8
1BQ25185DLHRfootprints:SON40P220X200X80-11NIC2
1Blade Fusefootprints:35222J12
1Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ5
1Conn_01x02_PinConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ9
1Conn_01x03_PinConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ10
1Conn_01x04_PinConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ4
1Conn_CoaxialConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ8
1Crystal_GND24footprints:ABM8272T3Y1
1CutJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP3
1GSB1C41110SSHRfootprints:GSB1C41110SSHRJ11
1LM66200DRLRfootprints:SOTFL50P160X60-8NIC1
1LOGOLOGOG***
1MSD-4-Afootprints:MSD4AJ14
1Polyfusefootprints:1206L075132WRF2
1RFM69HCWfootprints:MOD_COM-13909U4
1RP2350_60QFNfootprints:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalViasU1
1Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ6
1Screw_Terminal_01x03TerminalBlock:TerminalBlock_bornier-3_P5.08mmJ7
1TPS61023DRLTfootprints:SOTFL50P160X60-6NIC3
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU2
1WS2812Bfootprints:INPI15TAT5R5G5BD3

More from picolume/hardware

3
  • 2 layers47 × 86.9 mmPicoLume, the printed circuit board in 3D

    PicoLume

    picolume/hardware

    Hardware designs for the PicoLume wireless LED prop system. All designs are created in KiCad.

    71 partsMIT
  • 2 layers47 × 84.9 mmRemote v0.1.0, the printed circuit board in 3D

    Remote v0.1.0

    picolume/hardware

    Hardware designs for the PicoLume wireless LED prop system. All designs are created in KiCad.

    70 partsMIT
  • 2 layers47 × 84.9 mmReceiver v0.1.0, the printed circuit board in 3D

    Receiver v0.1.0

    picolume/hardware

    Hardware designs for the PicoLume wireless LED prop system. All designs are created in KiCad.

    69 partsMIT

Similar boards

  • 4 layers50.8 × 106.6 mmM.I.A., the printed circuit board in 3D

    M.I.A.

    landodoughty/Mission-Independent-Avionics-M.I.A.-

    My Custom Rocket Avionics System

    186 parts
  • 2 layers120 × 102.5 mmDsug cctv BOARD, the printed circuit board in 3D

    Dsug cctv BOARD

    LucasLHenry/spelltwister

    This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.

    251 partsMIT
  • 4 layers96 × 60 mmMainboard-2023, the printed circuit board in 3D

    Mainboard-2023

    luhbots/luhsoccer_electronics

    The eletronics projects of our robots and basestation.

    212 parts2
  • 4 layers51.8 × 68.3 mmButton Matrix RP2040, the printed circuit board in 3D

    Button Matrix RP2040

    hazenluk/RP2040_AS3394

    An AS3394 Voice Card with built in RP2040

    229 parts3
  • 2 layers158.8 × 100.2 mmChocobanan rev.1, the printed circuit board in 3D

    Chocobanan rev.1

    leonrat/Chocobanan

    An alice-like 40% split keyboard

    108 parts1
  • 4 layers50 × 50 mmFlightController Drone, the printed circuit board in 3D

    FlightController Drone

    damnitzhemanth-oss/Flight_Controller

    Custom STM based flightcontroller designed from scratch.

    157 parts
  • 4 layers70 × 68 mmSssata fluxpad Fluxpad, the printed circuit board in 3D

    Sssata fluxpad Fluxpad

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    78 parts1
  • 2 layers57.5 × 78.3 mmDroneV2, the printed circuit board in 3D

    DroneV2

    Flynsky/RP2040-Drone

    A simple Quadrocoper based on the RP2040

    100 parts

Questions

How big is the PicoLume v4 PCB?

It measures 47 × 90 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PicoLume v4 use?

102 parts, built around the 74AHCT1G125SE, AP63203WU, AP63205WU and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoLume v4 KiCad files?

From the picolume/hardware repository on GitHub, at the commit this page was made from: the board is series-legacy/v4/PicoLume_v4.kicad_pcb and its schematic series-legacy/v2/Pi_Pico_RFM69_Controller/Pi_Pico_RFM69_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoLume v4 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).