2 layers56.3 × 118.2 mm
Robot
jhud/robot_board
Controller board for building servo-based robots, such as hexapods.
90 parts1GPL-3.0
2 layers
Humidity-201601
phasianus/kicadKiCad libraries etc.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 7
- Pads
- 20
- Tracks, vias
- 29, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Nov 2017
- Updated
- 19 Nov 2017
Overview
Humidity-201601 is an open-source printed circuit board by phasianus, from the phasianus/kicad repository on GitHub. It is a 2-layer board with 5 parts on 7 nets, routed with 29 tracks and 0 vias.
It is built around the HIH-5030-001 and DS2438Z+. Its parts include 1 capacitor, 1 resistor and 1 connector.
Main components
2Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.01uF | Capacitors_SMD:C_1812_HandSoldering | C1 |
| 1 | 100k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | ds2438 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | SO1 |
| 1 | hih-5030-001 | Connectors_Molex:Connector_Molex_PicoBlade_53261-0371 | HS1 |
Questions
What parts does the Humidity-201601 use?
5 parts, built around the HIH-5030-001 and DS2438Z+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Humidity-201601 KiCad files?
From the phasianus/kicad repository on GitHub, at the commit this page was made from: the board is project/HumiditySensor/humidity-201601.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Humidity-201601 design in my own project?
Its repository states no licence, so its author keeps all rights: ask phasianus before reusing the design.
Similar boards
- 2 layers21.8 × 20.8 mm
Siot node current clamp
simpleiot/hardware
Hardware designs for IoT devices and sensor nodes.
9 parts9Apache-2.0 - 2 layers38.1 × 69.9 mm
Thunderstorm RevA
M2I-HABET/Project-Thunderstorm
Project Thunderstorm aims to launch high altitude balloons into thunderstorms in order to collect data. Multiple balloons will be launched to take data points at different points in the thunderstorm and to use a mesh…
25 parts1 - 2 layers25.4 × 28.6 mm
Sensor board mikroBus
ricardomv/temp-humidity-mikrobus
MikroBus sensor board for temperature and humidity.
22 parts1 - 2 layers30 × 15 mm
EzTempRH for Raspberry Pi
pablobacho/raspberrypi-eztemp
An air temperature and humidity sensor for Raspberry Pi that uses the serial port. #Easy #OpenHardware
19 partsMIT - 2 layers25 × 27.4 mm
HygroHiH50xx
l0ad/ubpe-ressources
Dépôt public contenant des cartes capteur produites par le L0AD dans le cadre du projet "Un ballon pour l'école" (Planète-Sciences)
7 parts - 2 layers98 × 27 mm
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0