pablobacho/raspberrypi-eztempAn air temperature and humidity sensor for Raspberry Pi that uses the serial port. #Easy #OpenHardware
EzTempRH for Raspberry Pi is an open-source printed circuit board by pablobacho, from the pablobacho/raspberrypi-eztemp repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 15 mm with 19 parts on 16 nets, routed with 227 tracks and 16 vias.
It is built around the HIH-5030-001. Its parts include 7 resistors, 6 capacitors, 3 connectors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | SMD_0603 | R3, R4, R5 |
| 2 | .1uF | SMD_0402 | C2, C4 |
| 2 | 1uF | SMD_0603 | C1, C3 |
| 2 | 5.6k | SMD_0603 | R6, R7 |
| 2 | C | SMD_0402 | C5, C6 |
| 2 | CONN_4 | PIN_4POS_1ROW_PTH_RA_2.54MM | P1, P2 |
| 1 | 1.5K | SMD_0603 | R1 |
| 1 | 680 | SMD_0603 | R2 |
| 1 | CONN_5 | PIN_5POS_1ROW_PTH_RA_2.54MM | P3 |
| 1 | CY8C4100-28SSOP | CY8C4xxx-28SSOP | U1 |
| 1 | HIH5030 | HIH5030 | U2 |
| 1 | THERMISTOR | SMD_0603 | TH1 |
It measures 30 × 15 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the HIH-5030-001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pablobacho/raspberrypi-eztemp repository on GitHub, at the commit this page was made from: the board is board/EzTempRH-for-Raspberry-Pi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
M2I-HABET/Project-Thunderstorm
Project Thunderstorm aims to launch high altitude balloons into thunderstorms in order to collect data. Multiple balloons will be launched to take data points at different points in the thunderstorm and to use a mesh…
ricardomv/temp-humidity-mikrobus
MikroBus sensor board for temperature and humidity.
l0ad/ubpe-ressources
Dépôt public contenant des cartes capteur produites par le L0AD dans le cadre du projet "Un ballon pour l'école" (Planète-Sciences)
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
