Skip to the content
2 layers325 × 130 mmTuxboard, the printed circuit board in 3D

My keyboard files (KiCad project, firmware)

Size
325 × 130 mm
Copper layers
2
Thickness
1.6 mm
Parts
251
Nets
188
Pads
1,269
Tracks, vias
2,907, 417
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Jul 2026
Updated
31 Jul 2026

Overview

Tuxboard is an open-source printed circuit board by petukhow, from the petukhow/tuxboard repository on GitHub. It is a 2-layer board of 325 × 130 mm with 251 parts on 188 nets, routed with 2,907 tracks and 417 vias.

Its parts include 81 diodes, 81 switches and 1 connector.

Parts

251
QtyValueFootprintReferences
811N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +65
81SW_PushPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1uSW1, SW2, SW10, SW11, SW12, SW13, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +65
80GNDi2c:LED_MX_6028R_fxws2812b2, ws2812b10, ws2812b11, ws2812b12, ws2812b13, ws2812b14, ws2812b15, ws2812b16, ws2812b17, ws2812b18, ws2812b19, ws2812b20, ws2812b21, ws2812b22, ws2812b23, ws2812b24 +64
1Conn_02x13_Odd_EvenConnector_IDC:IDC-Header_2x13_P2.54mm_VerticalJ1
1~i2c:LED_MX_6028R_fxws2812b1
1~i2c:Untitledi2c1

The 245 most common of 251 parts.

More from petukhow/tuxboard

1
  • 2 layers45 × 59 mmDaughtboard, the printed circuit board in 3D

    Daughtboard

    petukhow/tuxboard

    My keyboard files (KiCad project, firmware)

    2 parts

Similar boards

  • 2 layersKeyboard, the printed circuit board in 3D

    Keyboard

    masaleiro/HacKeyboard

    Open hardware mechanical keyboard

    251 parts81
  • 2 layers350 × 224.3 mmConsole, the printed circuit board in 3D

    Console

    danwerner21/TI99_22

    a 2022 replica of the classic TI/994a, using obtainable parts

    251 parts50
  • 2 layers201.2 × 190.3 mmMotion pcb, the printed circuit board in 3D

    Motion pcb

    a3-audio/a3-motion

    The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

    251 parts1
  • 2 layersLCP Controller, the printed circuit board in 3D

    LCP Controller

    NOAA-PMEL/EDD-LCP_Control

    Control PCB & Firmware for Low Cost Profiler

    251 parts1MIT
  • 2 layers282 × 282 mmOpenchess board, the printed circuit board in 3D

    Openchess board

    PaoloJN/openchess

    A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.

    251 parts1
  • 2 layers319.2 × 128.7 mmKeyBoard, the printed circuit board in 3D

    KeyBoard

    AlicDanclic/KeyBoard

    Copyright Statement 本文档/代码/作品受版权保护,版权所有@EternoPax。保留所有权利。 未经允许请勿转载 Do not reproduce without permission 联系我👉EternoPax@outlook.con @Copyright EternoPax

    251 parts
  • 2 layers335.7 × 101 mmSplitkeybaord, the printed circuit board in 3D

    Splitkeybaord

    garvita4/split-keyboard

    This is a custom spli keybaord with the 1.8inch tft diaply and rotatory encoder and also with nfc based lock system with the controlable backlight .

    251 parts
  • 2 layers120 × 102.5 mmDsug cctv BOARD, the printed circuit board in 3D

    Dsug cctv BOARD

    LucasLHenry/spelltwister

    This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.

    251 partsMIT

Questions

How big is the Tuxboard PCB?

It measures 325 × 130 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tuxboard use?

251 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tuxboard KiCad files?

From the petukhow/tuxboard repository on GitHub, at the commit this page was made from: the board is mainboard/project.kicad_pcb and its schematic daughboard/daughtboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tuxboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask petukhow before reusing the design.