

Tuxboard
My keyboard files (KiCad project, firmware)
- Size
- 325 × 130 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 251
- Nets
- 188
- Pads
- 1,269
- Tracks, vias
- 2,907, 417
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Jul 2026
- Updated
- 31 Jul 2026
Overview
Tuxboard is an open-source printed circuit board by petukhow, from the petukhow/tuxboard repository on GitHub. It is a 2-layer board of 325 × 130 mm with 251 parts on 188 nets, routed with 2,907 tracks and 417 vias.
Its parts include 81 diodes, 81 switches and 1 connector.
Parts
251| Qty | Value | Footprint | References |
|---|---|---|---|
| 81 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +65 |
| 81 | SW_Push | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +65 |
| 80 | GND | i2c:LED_MX_6028R_fx | ws2812b2, ws2812b10, ws2812b11, ws2812b12, ws2812b13, ws2812b14, ws2812b15, ws2812b16, ws2812b17, ws2812b18, ws2812b19, ws2812b20, ws2812b21, ws2812b22, ws2812b23, ws2812b24 +64 |
| 1 | Conn_02x13_Odd_Even | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J1 |
| 1 | ~ | i2c:LED_MX_6028R_fx | ws2812b1 |
| 1 | ~ | i2c:Untitled | i2c1 |
The 245 most common of 251 parts.
More from petukhow/tuxboard
1- 2 layers45 × 59 mm

Similar boards
- 2 layers

- 2 layers350 × 224.3 mm

- 2 layers201.2 × 190.3 mm

Motion pcb
a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.
251 parts1 - 2 layers

- 2 layers282 × 282 mm

Openchess board
PaoloJN/openchess
A chessboard that knows where the pieces are: 64 Hall sensors, 81 RGB LEDs, one ESP32, a printed case, and a BLE phone app. KiCad hardware, PlatformIO firmware, Expo app.
251 parts1 - 2 layers319.2 × 128.7 mm

KeyBoard
AlicDanclic/KeyBoard
Copyright Statement 本文档/代码/作品受版权保护,版权所有@EternoPax。保留所有权利。 未经允许请勿转载 Do not reproduce without permission 联系我👉EternoPax@outlook.con @Copyright EternoPax
251 parts - 2 layers335.7 × 101 mm

Splitkeybaord
garvita4/split-keyboard
This is a custom spli keybaord with the 1.8inch tft diaply and rotatory encoder and also with nfc based lock system with the controlable backlight .
251 parts - 2 layers120 × 102.5 mm

Dsug cctv BOARD
LucasLHenry/spelltwister
This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.
251 partsMIT
Questions
How big is the Tuxboard PCB?
It measures 325 × 130 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tuxboard use?
251 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tuxboard KiCad files?
From the petukhow/tuxboard repository on GitHub, at the commit this page was made from: the board is mainboard/project.kicad_pcb and its schematic daughboard/daughtboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tuxboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask petukhow before reusing the design.