

Mansour esc hw
various hw projects done with kicad
- Size
- 55 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 30
- Pads
- 147
- Tracks, vias
- 330, 122
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Apr 2026
- Updated
- 31 May 2026
Overview
Mansour esc hw is an open-source printed circuit board by peakhunt, from the peakhunt/kicad_hw repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 23 mm with 41 parts on 30 nets, routed with 330 tracks and 122 vias.
It is built around the FD6288T, AON6414AL and 1N4148W. Its parts include 16 resistors, 9 capacitors, 6 transistors, 6 connectors and 3 diodes. It belongs with the robots and motor control boards of this library.
Main components
3FD6288T
TSSOP-20-40℃~+125℃ 1.5A 1.8A 12ns 12ns 2.7V 330uA 4.8V~20V 6 800mV Half-Bridge IGBT、MOSFET Under Voltage Protection、Short Circuit Protection TSSOP-20 Gate Drivers ROHSFortior TechGate DriversAON6414AL
PDFN-8(5.9x5.2)-55℃~+150℃ 1 N-channel 1.38nF 150pF 2.5V 24nC@10V 30V 31W 50A 8mΩ@10V PDFN-8(5.9x5.2) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 6 | 47K | Resistor_SMD:R_0603_1608Metric | R7, R9, R10, R12, R14, R16 |
| 6 | AON6414A | Package_SO:PowerPAK_SO-8_Single | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 100pF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R8, R11, R15 |
| 3 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 3.3K | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | B+ | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J1 |
| 1 | B- | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J2 |
| 1 | FD6288T | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Motor U | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J5 |
| 1 | Motor V | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J6 |
| 1 | Motor W | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J7 |
| 1 | uC connect | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J3 |
More from peakhunt/kicad_hw
5- 2 layers20 × 24 mm

- 2 layers80 × 30 mm

- 2 layers27 × 30 mm

- 2 layers64 × 68 mm

- 2 layers30 × 25 mm

Similar boards
- 2 layers99.5 × 99.1 mm

- 4 layers89.8 × 41.5 mm

- 2 layers130 × 95 mm

Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
166 parts - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm

- 4 layers95.6 × 73.6 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT
Questions
How big is the Mansour esc hw PCB?
It measures 55 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mansour esc hw use?
41 parts, built around the FD6288T, AON6414AL and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mansour esc hw KiCad files?
From the peakhunt/kicad_hw repository on GitHub, at the commit this page was made from: the board is mansour_esc_hw/mansour_esc_hw.kicad_pcb and its schematic esp32_c3_base_hw/esp32_c3_base_hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mansour esc hw design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).