

Own ESC
- Size
- 99.5 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 384
- Nets
- 36
- Pads
- 1,416
- Tracks, vias
- 4,320, 408
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Oct 2020
- Updated
- 20 Oct 2020
Overview
Own ESC is an open-source printed circuit board by yutaka-m, from the yutaka-m/BLHeli_ESC_PCB repository on GitHub. It is a 2-layer board of 99.5 × 99.1 mm with 384 parts on 36 nets, routed with 4,320 tracks and 408 vias.
It is built around the EFM8BB21F16G-C-QSOP24R, FD6288T and LM1117-3.3, with the LM1117-5.0, TPH1R403NL,L1Q and BAT54W among its other parts. Its parts include 136 resistors, 80 capacitors, 64 connectors, 48 transistors and 32 ICs. It belongs with the robots and motor control boards and the Silicon Labs (EFR32, EFM) boards of this library.
Main components
6EFM8BB21F16G-C-QSOP24R
QSOP-24-150mil-40℃~+85℃ 12bit 16KB 2.25KB 2.2V~3.6V 21 50MHz 51 Series 8 Bit Built-in FLASH QSOP-24-150mil Microcontrollers (MCU/MPU/SOC) ROHSSilicon LabsMicrocontrollers (MCU/MPU/SOC)FD6288T
TSSOP-20-40℃~+125℃ 1.5A 1.8A 12ns 12ns 2.7V 330uA 4.8V~20V 6 800mV Half-Bridge IGBT、MOSFET Under Voltage Protection、Short Circuit Protection TSSOP-20 Gate Drivers ROHSFortior TechGate DriversLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLM1117-5.0
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 5V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedTPH1R403NL,L1Q
DFN-8-5x6MOSFETsToshibaBAT54W
SOD-123Schottky Diodeshongjiacheng
README
README.md#BLHeli ESC PCB
Parts
384| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 25 | Capacitor_SMD:C_0603_1608Metric | R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R2, R2 +32 |
| 48 | TPH1R403NL,L1Q | TPH1R403NLL1Q | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2, Q2, Q2, Q2, Q2 +32 |
| 40 | 1k | Capacitor_SMD:C_0603_1608Metric | R11, R11, R11, R11, R11, R11, R11, R11, R14, R14, R14, R14, R14, R14, R14, R14 +24 |
| 32 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C3, C3, C3, C3, C3, C3, C3, C10, C10, C10, C10, C10, C10, C10, C10 +16 |
| 24 | 10k | Capacitor_SMD:C_0603_1608Metric | R10, R10, R10, R10, R10, R10, R10, R10, R13, R13, R13, R13, R13, R13, R13, R13 +8 |
| 24 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C2, C2 +8 |
| 24 | 4k | Capacitor_SMD:C_0603_1608Metric | R12, R12, R12, R12, R12, R12, R12, R12, R15, R15, R15, R15, R15, R15, R15, R15 +8 |
| 24 | BAT54W | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 +8 |
| 8 | +BAT PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J2, J2, J2, J2, J2, J2, J2, J2 |
| 8 | -BAT PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J3, J3, J3, J3, J3, J3, J3, J3 |
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C7, C7, C7, C7, C7, C7, C7 |
| 8 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C5, C5, C5, C5, C5, C5, C5 |
| 8 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C8, C8, C8, C8, C8, C8, C8, C8 |
| 8 | A PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J6, J6, J6, J6, J6, J6, J6, J6 |
| 8 | B PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J7, J7, J7, J7, J7, J7, J7, J7 |
| 8 | C PAD | TestPoint:TestPoint_Pad_2.5x2.5mm | J8, J8, J8, J8, J8, J8, J8, J8 |
| 8 | CLK PAD | TestPoint:TestPoint_Pad_1.5x1.5mm | J5, J5, J5, J5, J5, J5, J5, J5 |
| 8 | EFM8BB21F16G-C-QSOP24R | SOP64P600X175-24N | IC1, IC1, IC1, IC1, IC1, IC1, IC1, IC1 |
| 8 | FD6288T | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U3, U3, U3, U3, U3, U3, U3, U3 |
| 8 | LM1117-5.0 | Package_TO_SOT_SMD:SOT-223 | U2, U2, U2, U2, U2, U2, U2, U2 |
| 8 | RX PAD | TestPoint:TestPoint_Pad_1.5x1.5mm | J4, J4, J4, J4, J4, J4, J4, J4 |
| 8 | SIGNAL PAD | TestPoint:TestPoint_Pad_1.5x1.5mm | J1, J1, J1, J1, J1, J1, J1, J1 |
Similar boards
- 2 layers55 × 23 mm

- 4 layers89.8 × 41.5 mm

- 2 layers130 × 95 mm

Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
166 parts - 2 layers80.3 × 54.9 mm

SmartDoor
bgerp/ztm_doc
This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.
41 parts - 2 layers84.3 × 58.4 mm

EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers97 × 97 mm

QO100 RX
barisdinc/N3B_SDR_Transceiver_HW
V/U/SHF and QO-100 SDR Transceiver Project
167 parts20GPL-3.0 - 2 layers85 × 60 mm

BaseModule
KarlVaello/VehicleControlSystem
Vehicle Control System. Using C++ Qt and C. Hardware and Software
67 parts14GPL-3.0 - 2 layers40 × 100 mm

MidiMonger components
dchwebb/MidiMonger
Eurorack MIDI interface supporting USB and serial MIDI. Based on ARM STM32F446 MCU.
70 parts12
Questions
How big is the Own ESC PCB?
It measures 99.5 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Own ESC use?
384 parts, built around the EFM8BB21F16G-C-QSOP24R, FD6288T, LM1117-3.3 and LM1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Own ESC KiCad files?
From the yutaka-m/BLHeli_ESC_PCB repository on GitHub, at the commit this page was made from: the board is own_ESC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Own ESC design in my own project?
Its repository states no licence, so its author keeps all rights: ask yutaka-m before reusing the design.