

Daisy Amps
Arduino Code for Daisy Seed
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 64
- Pads
- 144
- Tracks, vias
- 8, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Oct 2025
- Updated
- 10 Apr 2026
Overview
Daisy Amps is an open-source printed circuit board by paul-wang1, from the paul-wang1/Axis_project repository on GitHub. It is a 2-layer board with 40 parts on 64 nets, routed with 8 tracks and 0 vias.
It is built around the MCP6004-E/P and OPA2134UA. Its parts include 21 resistors, 12 capacitors, 3 ICs and 1 connector. It belongs with the audio and music boards of this library.
Main components
2MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierOPA2134UA
SOIC-8-18V~-2.5V、2.5V~18V -40℃~+85℃ 100dB 2 20V/us 2uV/℃ 35mA 500uV 50pA 5mA 5pA 8MHz 8nV/√Hz@1kHz Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsAudio Amplifiers
README
README.mdAxis Project
Overview
A guitar pedal that you can change while you play! The Axis guitar will modulate an effect of your choice based on guitar movement. Two different effects can be modulated at the same time by choosing to modulate on different rotational axes.
Features
- Modulate effects based on movement
- Two effects can be modulated
- Effects are programmable
Schematics and PCB Designs
Schematics and PCB designs are created using KiCad. The project files for both the guitar unit and the floor unit can be found within the PCB folder.
Audio ESP32
The ESP32 microcontroller on the ground. This is responsible for connecting to the guitar unit and relaying sensor data to the daisy seed via I2C.
IMU ESP32
The ESP32 microcontroller on the guitar. This is responsible for advertising itself over bluetooth and relaying sensor data to the devices that it is connected to.
Daisy Seed
The Daisy seed is responsible for handling the audio and modulating it based on the sensor data. After an effect is programmed the daisy seed will modulate the audio input.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 2M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R11, R13, R16 |
| 4 | 10UF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C8 |
| 3 | 2M | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 100NF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 100NF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R12 |
| 2 | 10UF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 2.2NF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | 3.3K | Resistor_SMD:R_0805_2012Metric | R14, R15 |
| 2 | ACJS-MHOM | audiojack:CONN06_JACK_ACJS_15P75X25_AMP | Audio_in_jack1, Audio_in_jack2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | I2C_Output_Pins1 |
| 1 | Daisy_Seed | Daisy-Boards:DAISY_SEED | U5 |
| 1 | MCP6004 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | OPA2134 | Package_DIP:DIP-8_W7.62mm_LongPads | U2 |
| 1 | Power and Ground | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
More from paul-wang1/Axis_project
1- 2 layers44.5 × 25 mm

Similar boards
- 4 layers94 × 82 mm

DaisyMultiFX
pablojonsson/DaisyMultiFX
Code for a Daisy Seed development board to run guitar effects
51 partsGPL-3.0 - 4 layers54 × 106 mm

DaisySeedPedal1590b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
60 parts559MIT - 2 layers106 × 95.4 mm

- 2 layers81.2 × 87.2 mm

PENDA
DADDesign-Projects/PENDA-Hardware
This repository contains the schematics and PCB layouts created with KiCad 8.0 for a versatile digital effects platform that utilizes the Daisy-Seed board from ElectroSmith.
44 parts12 - 2 layers58.4 × 50.8 mm

Haible tau phaser plug in board
JordanAceto/VCF_plug_in_boards
Various small synthesizer Voltage Controlled Filter pcbs
140 parts11CC-BY-4.0 - 4 layers75 × 95 mm

- 2 layers50 × 50 mm

EMFDetector
curiouselectric/EMFDetector
A simple electro-magnetic field detector for viewing the unseen world around us.
23 parts7 - 4 layers100 × 85.5 mm

PCM3168APAP breakout
fsanzeni/PCM3168APAP-breakout
A breakout board for the Texas Instruments PCM3168APAP audio codec, featuring 6 analog inputs and 8 analog outputs with high-quality buffering and filtering circuitry.
206 parts5MIT
Questions
What parts does the Daisy Amps use?
40 parts, built around the MCP6004-E/P and OPA2134UA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daisy Amps KiCad files?
From the paul-wang1/Axis_project repository on GitHub, at the commit this page was made from: the board is PCB/Daisy_Amps/Daisy_Amps.kicad_pcb and its schematic PCB/Daisy_Amps/Daisy_Amps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daisy Amps design in my own project?
Its repository states no licence, so its author keeps all rights: ask paul-wang1 before reusing the design.