
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.

Launch Control Systems Ground is an open-source printed circuit board by pashyatidar, from the pashyatidar/AvionicsJr repository on GitHub. It is a 2-layer board of 80 × 80 mm with 26 parts on 49 nets, routed with 125 tracks and 2 vias.
It is built around the IRLB8721PBF and XT60-M. Its parts include 5 resistors, 5 connectors, 4 ICs, 3 diodes and 2 capacitors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 330 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4 |
| 2 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2, J3 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 0.33uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Arm_LED | LED_THT:LED_D5.0mm | D2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | ESP32-S3-DEVKITC-1U-N8R2 | ESP32-DEVKITC-S3-1U:XCVR_ESP32-S3-DEVKITC-1U-N8R2 | U5 |
| 1 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | Launch_LED | LED_THT:LED_D5.0mm | D3 |
| 1 | Safe_LED | LED_THT:LED_D5.0mm | D1 |
| 1 | TestPoint | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP1 |
| 1 | XT60-M | XT60-M:AMASS_XT60-M | J4 |
| 1 | ~ | SD_Crd_Library:SD card reader 2 | U4 |
| 1 | ~ | Launch_Control_System_Library:RYLR_998_SKT | U2 |

KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.


stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.



chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough


Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the IRLB8721PBF and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pashyatidar/AvionicsJr repository on GitHub, at the commit this page was made from: the board is Launch Control System/Ground Station/Launch_Control_Systems_ Ground.kicad_pcb and its schematic Launch Control System/Ground Station/Launch_Control_Systems_ Ground.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pashyatidar before reusing the design.