
TD1 2.4G
Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.
/G_TX1/G_TX1.kicad_pcb.jpg)
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.
G TX1 is an open-source printed circuit board by Paschalis, from the Paschalis/UAV-TelemetryLink repository on GitHub, published under the MIT licence. It is a 6-layer board of 39.8 × 55.8 mm with 44 parts on 80 nets, routed with 662 tracks and 149 vias.
It is built around the E28-2G4M27S, ESP32-WROOM-32 and ESP8285H16, with the MF-PSMF020X-2, SMBJ60A and W3008 among its other parts. Its parts include 16 capacitors, 9 resistors, 5 ICs, 5 connectors and 2 diodes. It belongs with the ESP32 and ESP8266 boards of this library.
Antenna Diversity (Basic diversity setup)

Click the icons to open iBOM or KiCanvas
| Reference | Value | Datasheet | Footprint | Qty | DNP |
|---|---|---|---|---|---|
| AE1 | Antenna | ~ | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | 1 | |
| ANT1, ANT2 | Conn_Coaxial | ~ | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | 2 | |
| C1, C30, C32 | 10uF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder,ECASD40J106M055K00:ECASD40J106M055K00 | 3 | |
| C2 | 1uF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1 | |
| C3 | 47uF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1 | |
| C4 | 2.2uF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1 | |
| C5, C6, C21, C22 | 10pF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 4 | |
| C7, C16, C17, C23, C24, C25, C26, C27, C28, C29 | 100nF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 10 | |
| C18 | 470nF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1 | |
| C19, C20 | 10nF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 2 | |
| C31 | 0.1uF | ~ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1 | |
| D1 | LED | ~ | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | 1 | |
| FL1 | 2450FM07D0034T | Datasheet | 2450FM07D0034T:2450FM07D0034T | 1 | |
| J1 | Conn_01x04_Socket | ~ | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | 1 | |
| J3 | Conn_01x04_Pin | ~ | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | 1 | |
| JP1 | Jumper_2_Bridged | ~ | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | 1 | |
| R1 | 2.2K | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 | |
| R2, R3, R7, R8, R10 | 10K | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 5 | |
| R4 | 12K | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 | |
| R5 | 0 | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 | |
| R6 | 1K | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 | |
| R9 | 1.2K | ~ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 | |
| U1 | TPS7A4701xRGW | Datasheet | Package_DFN_QFN:Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm_ThermalVias | 1 | |
| U2 | SX1280IMLTRT | SX1280IMLTRT | SX1280IMLTRT:QFN24_4X4_SEM | 1 | |
| U3 | ESP8285H16 | ESP8285H16 | ESP8285H16:QFN32_5X5_EXP | 1 | |
| U4 | SE2431L-R | SE2431L-R | SE2431L-R:SE2431L_SKY | 1 | |
| Y1 | 52MHz | ~ | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | 1 | |
| Y2 | 26MHz | ~ | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | 1 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C24, C25, C26, C27, C28, C29 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R7, R8, R9 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C22 |
| 2 | 10uF | ECASD40J106M055K00:ECASD40J106M055K00 | C30, C32 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | E28-2G4M27S | Library:E28 | U3, U5 |
| 2 | Jumper_2_Small_Bridged | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31 |
| 1 | 1.5pF | Capacitor_SMD:C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C33 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 26MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Conn_01x05_Socket | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_02x06_Odd_Even | Connector_JST:JST_PHD_B12B-PHDSS_2x06_P2.00mm_Vertical | J4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | ESP8285H16 | ESP8285H16:QFN32_5X5_EXP | U4 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MF-PSMF020X-2 | ul_MF-PSMF020X-2:FUSE_F020X_BRN | F1 |
| 1 | SMBJ60A | ul_SMBJ60A:SMBJSeries_LTF | CR1 |
| 1 | TPS7A4701xRGW | Package_DFN_QFN:Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm_ThermalVias | U1 |
| 1 | W3008 | W3008:ANTENNA_W3008 | ANT1 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

Paschalis/UAV-TelemetryLink
Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

Momozavur/Mravka-v2
Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.

Momozavur/Mravka-v3
Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.

fliperama86/neopico-hd
Digital video and audio capture with HDMI output for Neo Geo MVS arcade hardware using Raspberry Pi Pico 2

adsehgal/Bench_Power_Supply
A design for a custom bench top power supply for prototyping.


SharKingStudios/Tadpole-FPV
A small FPV drone that has a custom transmitter PCB.


It measures 39.8 × 55.8 mm and has 6 copper layers, 1.53 mm thick.
44 parts, built around the E28-2G4M27S, ESP32-WROOM-32, ESP8285H16 and MF-PSMF020X-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Paschalis/UAV-TelemetryLink repository on GitHub, at the commit this page was made from: the board is Receivers and Transmitters/Transmitters/Gemini Mode (Single Band)/G_TX1/G_TX1.kicad_pcb and its schematic Receivers and Transmitters/Receivers/Antenna Diversity/ExpressLRS_2.4GHz/AD1_2.4G/AD1_2.4G.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).