Skip to the content
2 layers55.9 × 40.1 mmTX2 2.4G, the printed circuit board in 3D

Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.

Size
55.9 × 40.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
45
Pads
152
Tracks, vias
155, 36
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Sep 2026
Updated
10 Sep 2026

Overview

TX2 2.4G is an open-source printed circuit board by Momozavur, from the Momozavur/Mravka-v2 repository on GitHub. It is a 2-layer board of 55.9 × 40.1 mm with 33 parts on 45 nets, routed with 155 tracks and 36 vias.

It is built around the E28-2G4M27S, ESP32-WROOM-32 and WS2812B-2020. Its parts include 8 capacitors, 8 connectors, 6 resistors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Mravka v2

KiCad design files for Mravka v2.

Project files

Open the appropriate .kicad_pro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together. Hierarchical schematic sheets are part of their parent design.

Git workflow

Automatic backups, recovery files, editor state, and filesystem metadata are ignored. Existing fabrication outputs and local component libraries are retained. For existing repositories, ignore rules do not automatically untrack previously committed files.

Review and save a meaningful design revision with:

sh
git status --short
git diff
git add -- <changed-files>
git commit -m "Describe the design change"

Documentation images

Add a clear 3D board view at docs/images/board-3d.png and, optionally, a PCB layout view at docs/images/pcb-layout.png. A schematic PDF is useful for reading circuit details. Once present, embed an image in this README with ![Board 3D view](docs/images/board-3d.png). For folders with several designs, use a separate named image for each.

Design notes to complete

Describe purpose, power and connectors, revision status, assembly requirements, and what has been physically tested. The repository setup does not establish electrical correctness or manufacturing readiness.

Repository portability notes

  • Mravka, Mravka v2, and Mravka v3 have existing histories and the same origin. Keep these working copies separate until their revisions can be reconciled deliberately.

Parts

33
QtyValueFootprintReferences
3100nCapacitor_SMD:C_1206_3216MetricC1, C2, C8
310uFCapacitor_SMD:C_1206_3216MetricC3, C5, C7
3Conn_01x04_SocketTerminalBlock:CUI_TB002-500-04BEJ1, J7, J8
2100kΩResistor_SMD:R_1206_3216MetricR2, R3
222uFCapacitor_SMD:C_1206_3216MetricC4, C6
2Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J9
2MountingHoleMountingHole:MountingHole_4.3mm_M4_ISO14580_Pad_TopBottomH1, H1
2TPS22810DBVRLibrary:SOT95P280X145-6NSW1, SW2
110KResistor_SMD:R_1206_3216MetricR1
110kResistor_SMD:R_1206_3216MetricR5
120kResistor_SMD:R_1206_3216MetricR4
1330Resistor_SMD:R_1206_3216MetricR6
1Conn_01x02_SocketTerminalBlock:CUI_TB002-500-02BEJ5
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_01x06_SocketConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1E28-2G4M27SLibrary:E28U3
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1G***kibuzzard-699A5527kibuzzard-699A5527
1G***kibuzzard-699A551Fkibuzzard-699A551F
1LOGOLOGOG***
1REDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD2

Similar boards

  • 6 layers39.8 × 55.8 mmG TX1, the printed circuit board in 3D

    G TX1

    Paschalis/UAV-TelemetryLink

    Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

    44 parts11MIT
  • 4 layers63.7 × 55 mmTX2 2.4G, the printed circuit board in 3D

    TX2 2.4G

    Momozavur/Mravka-v3

    Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.

    78 parts
  • 2 layers49 × 106 mmTadpole FPV PCB, the printed circuit board in 3D

    Tadpole FPV PCB

    SharKingStudios/Tadpole-FPV

    A small FPV drone that has a custom transmitter PCB.

    48 parts
  • 2 layers141.8 × 151.3 mmRadioNoob, the printed circuit board in 3D

    RadioNoob

    EIectron/RadioNoob

    An Open Source Radio Transmitter Project

    189 parts8
  • 4 layers88 × 94.5 mmFC V5a, the printed circuit board in 3D

    FC V5a

    proveskit/flight_controller_board

    The main flight computer board for the PROVES Kit.

    270 parts6CERN-OHL-W-2.0
  • 4 layers130 × 40 mmPumaTX MB HW00, the printed circuit board in 3D

    PumaTX MB HW00

    PumaFPV/PumaTX

    DIY FPV Remote controller based on the one from the mavic

    121 parts4MIT
  • 2 layers40.5 × 56 mmE28 tx, the printed circuit board in 3D

    E28 tx

    R4ynor/ExpressLRS_HW_stuff

    28 parts2
  • 2 layers40.5 × 56 mmRanger24, the printed circuit board in 3D

    Ranger24

    EIectron/ExpressLRS-Ranger-Modul

    2.4GHz Ranger Modul

    39 parts

Questions

How big is the TX2 2.4G PCB?

It measures 55.9 × 40.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TX2 2.4G use?

33 parts, built around the E28-2G4M27S, ESP32-WROOM-32 and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TX2 2.4G KiCad files?

From the Momozavur/Mravka-v2 repository on GitHub, at the commit this page was made from: the board is TX2_2.4G.kicad_pcb and its schematic TX2_2.4G.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TX2 2.4G design in my own project?

Its repository states no licence, so its author keeps all rights: ask Momozavur before reusing the design.