Skip to the content
12

W3008

Pulse ElecExtended

-40℃~+85℃、-40℃~+85℃、-40℃~+85℃ 1.1dBi 1.1mm 1.6mm 2.44175GHz 3.2mm 50Ω 5W 83.5MHz 1206 Antennas ROHS

Part id
pulse-elec/W3008
Category
Antennas
Package
1206
Pins
2
In stock
2,176 at JLCPCB (C581402)
Used on
13 open-source boards

Overview

The W3008 is an antenna made by Pulse Elec in a 1206 package with 2 pins. -40℃~+85℃、-40℃~+85℃、-40℃~+85℃ 1.1dBi 1.1mm 1.6mm 2.44175GHz 3.2mm 50Ω 5W 83.5MHz 1206 Antennas ROHS.

PCBKit's library has its footprint (Resistor_SMD:R_1206_3216Metric, from KiCad's library), ready for a KiCad board. 2,176 are in stock at JLCPCB (part C581402). 13 open-source boards in 10 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12
Resistor_SMD:R_1206_3216MetricFrom KiCad's library

From the datasheet

2
Works from
-40 °C · Operating ambient temperature min · p. 2
Works up to
85 °C · Operating ambient temperature max · p. 2

What it is and has

9
Frequency range
2400-2483.5MHz · p. 1
Size
3.2 x 1.6 x 1.1mm · p. 1
Efficiency
66 % · p. 1
Gain
1.1 dBi · p. 1
Polarization
Linear · p. 1
Power Handling
5W · p. 1
RoHS
Compliant · p. 1
Moisture Sensitivity Level
MSL3 · p. 1
Applications
Bluetooth, BLE, Zigbee, WiFi · p. 1

Specifications

9
ParameterConditionsAs printedPage
FrequencyMeasured on 80*37mm PCB with 4*4.25mm clearance in free space; no matching component used.min 2400 · max 2483.5 MHz2
Nominal ImpedanceMeasured on 80*37mm PCB with 4*4.25mm clearance in free space; no matching component used.typ 50 2
Return LossMeasured on 80*37mm PCB with 4*4.25mm clearance in free space; no matching component used. Stated value; limit designation unspecified.typ -4 dB2
GainMeasured on 80*37mm PCB with 4*4.25mm clearance in free space; no matching component used.typ 1.1 dBi2
EfficiencyMeasured on 80*37mm PCB with 4*4.25mm clearance in free space; no matching component used.typ 66 %2
Power Withstandingmax 5 W2
Weighttyp 33 mg2
Operating Temperaturemin -40 · max 85 °C2
Storage Temperaturemin -40 · max 85 °C2

Pins, by the datasheet

2
1 Feed /GND
Feed or ground terminal; the antenna is symmetrical, so either pad can be used as feed. · p. 3
2 Feed /GND
Feed or ground terminal; the antenna is symmetrical, so either pad can be used as feed. · p. 3

Open-source boards using it

13See all 13
  • 6 layers13 × 9.4 mmFemu, the printed circuit board in 3D

    Femu

    femtoduino/femu-hardware

    Femto ESP32 Micro USB

    43 parts33MIT
  • 6 layers20.3 × 15.2 mmBomu, the printed circuit board in 3D

    Bomu

    femtoduino/bomu-hardware

    Bluetooth "TOMU" board

    47 parts16MIT
  • 6 layers39.5 × 39.5 mmTD1 2.4G, the printed circuit board in 3D

    TD1 2.4G

    Paschalis/UAV-TelemetryLink

    Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

    63 parts11MIT
  • 2 layers33 × 22 mmNanoSense Motion, the printed circuit board in 3D

    NanoSense Motion

    bluetiger9/nanoSense-Motion

    Motion & Human Presence Sensing with Ultra Low Power Consumption and Bluetooth Low Energy Connectivity

    37 parts8
  • 4 layers50 × 50 mmWatch, the printed circuit board in 3D

    Watch

    plumpastry/PHW

    Plum's Embedded Devices Hardware and Firmware

    99 parts2
  • 4 layers37.5 × 36 mmTD M10S LSM, the printed circuit board in 3D

    TD M10S LSM

    Paschalis/fc-plus-sensor-module

    FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.

    85 parts1GPL-3.0
  • 2 layers100 × 50 mmStm32, the printed circuit board in 3D

    Stm32

    slimmpylk/PCB-project-stm32.02

    The primary goal of this project was to intricately design the electronics and circuit board for a sophisticated embedded device.

    34 parts
  • 4 layers39.9 × 22.7 mmBBB, the printed circuit board in 3D

    BBB

    SunDevilRocketry/Bluetooth-Breakout

    STM Bluetooth board with chip and antenna based around the STMWBA50

    36 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the W3008?

Yes. the footprint Resistor_SMD:R_1206_3216Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the W3008?

1206, with 2 pins. Its footprint is drawn on this page.

Where is the W3008 datasheet?

Pulse Elec publishes it: the Datasheet link on this page opens it.

Where can I order the W3008?

JLCPCB lists it as part C581402, with 2,176 in stock; the sellers' links on this page open their listings.

What can replace the W3008?

Parts like it in the library: the W3008C by Pulse Elec, the ACR0301U by Abracon, the KH-3216-A27 by Shenzhen Kinghelm Elec and the RFANT3216120A3T by Walsin Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the W3008?

13 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.