
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

A compact macropad featuring RGB lighting with SK6812 MINI-E Neopixel LEDs, a rotary encoder, a SSD1306 OLED Display and 15 (low-profile) choc mechanical switches! Powered by KMK firmware!
Easypad V2 is an open-source printed circuit board by parya7254, from the parya7254/Easypad-V2 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 51 parts on 86 nets, routed with 511 tracks and 100 vias.
It is built around the SK6812MINI-E and 1N4148W. Its parts include 33 diodes, 16 switches and 1 connector. It belongs with the lEDs and displays and keyboards and input boards and the RP2040 boards of this library.
A compact macropad featuring RGB lighting with SK6812 MINI-E Neopixel LEDs, a rotary encoder, a SSD1306 OLED Display and 15 (low-profile) choc mechanical switches! Powered by KMK firmware!
Per-key RGB lighting via SK6812 MINI-E RGB LEDs, page scrolling via the onboard EC11 rotary encoder, a 0.91" 128x32 SSD1306 OLED display to display current mode, and 15 tactile low profile Kalih Choc V1 switches for compactability.
I wanted to experiment with compact designs and Choc switches. I built this to help get the grasp of making keyboards/macropads with Kalih Choc switches since they have a different pin layout and are way more compact. I also wanted to make this because I really love designing hardware projects and PCBs in general every chance I get time.
To flash the firmware to the macropad, first you will need to install CircuitPython onto the RPi Pico by first downloading the .uf2 file from the CircuitPython website and then dragging and dropping it to the USB Drive the Pico shows up as. Then, install KMK on it and then upload the code.py to the board. Instructions for installing KMK is on the KMK GitHub repo.
The assembled version is in Assembly 1! https://cad.onshape.com/documents/4159a499467d346143555145/w/def90a5bdc25ba8320f86079/e/58cc027c9599ddc6d01a6483
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SK6812MINI-E | Hackclub Footprints:MX_SK6812MINI-E_REV | D1, D2, D3, D4, D5, D6, D7, D8, D18, D23, D28, D29, D30, D31, D32, D33 +1 |
| 16 | 1N4148W | Diode_SMD:D_SOD-123 | D10, D11, D12, D13, D14, D15, D16, D17, D19, D20, D21, D22, D24, D25, D26, D27 |
| 15 | SW_Push | ScottoKeebs_Choc:Choc_V1_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW16 |

sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…


sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.



WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the SK6812MINI-E and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the parya7254/Easypad-V2 repository on GitHub, at the commit this page was made from: the board is PCB/Easypad-V2.kicad_pcb and its schematic PCB/Easypad-V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask parya7254 before reusing the design.