
Panelised pcb
parammakersadda/CH32-devBoard
a simple development board based on CH32X033F8P6 microcontroller

a simple development board based on CH32X033F8P6 microcontroller
Ch32-devboard is an open-source printed circuit board by parammakersadda, from the parammakersadda/CH32-devBoard repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 29.2 × 39 mm with 22 parts on 28 nets, routed with 147 tracks and 20 vias.
It is built around the AP2112K-3.3. Its parts include 6 resistors, 5 connectors, 4 capacitors, 2 diodes and 2 switches. It belongs with the microcontroller boards boards of this library.
This directory contains the panelized PCB design for the CH32 development board.
Panelization is automated using KiKit through a KiCad Jobset.
.kicad_jobset).The panelized PCB will be generated automatically.
front
back
routing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | SW_Push | ch32-devBoard-symbols:smd-push-button-TS3425PA | SW1, SW2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J4 |
| 1 | VDD(3v3) | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | ~ | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | mcu1 |

parammakersadda/CH32-devBoard
a simple development board based on CH32X033F8P6 microcontroller

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…




It measures 29.2 × 39 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the parammakersadda/CH32-devBoard repository on GitHub, at the commit this page was made from: the board is ch32-devboard.kicad_pcb and its schematic ch32-devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).