
Power regulator
ParagChoukekar/PCB_DESIGNS
This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.

This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.
Esp32 dev is an open-source printed circuit board by ParagChoukekar, from the ParagChoukekar/PCB_DESIGNS repository on GitHub, published under the MIT licence. It is a 4-layer board of 20 × 26 mm with 44 parts on 37 nets, routed with 310 tracks and 87 vias.
It is built around the ESP32-C3, W25X40CLSNIG and ESD9B3.3ST5G. Its parts include 12 capacitors, 7 resistors, 2 ICs, 2 inductors and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | ~ | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | 3V3, EN, GND, IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9, IO10, IO18, IO19 +2 |
| 12 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 7 | R_US | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7 |
| 2 | L | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D1 |
| 1 | ESP32-C3 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | W25X40CLSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ~ | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | Texas_SWRA117D_2.4GHz_Left1 |

ParagChoukekar/PCB_DESIGNS
This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.


pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.


CU-Rocketry/payload-datalogger
Wirelessly configurable thermocouple data logging PCB implementing four MCP96RL00T on-board thermocouple to I2C converter ICs, an ESP32-C3 MCU, and flash storage.


jerry-kerenzikov/ytterbium
Project files for Ytterbium modular CPU platform and Yprog programming tool

It measures 20 × 26 mm and has 4 copper layers, 1.81 mm thick.
44 parts, built around the ESP32-C3, W25X40CLSNIG and ESD9B3.3ST5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ParagChoukekar/PCB_DESIGNS repository on GitHub, at the commit this page was made from: the board is ESP32_C3_Mod/esp32_dev.kicad_pcb and its schematic ESP32_C3_Mod/esp32_dev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).