
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

HBridge is an open-source printed circuit board by papatalla01, from the papatalla01/Projet_f1tenth repository on GitHub. It is a 2-layer board of 55.8 × 33.6 mm with 36 parts on 26 nets, routed with 153 tracks and 0 vias.
It is built around the SP8M4HZGTB and 1N4148W. Its parts include 12 resistors, 8 capacitors, 4 ICs, 4 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R5 |
| 4 | 100pF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C2, C3, C4 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | 1k | Resistor_SMD:R_0508_1220Metric_Pad1.12x2.15mm_HandSolder | R3, R6, R7, R8 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R12 |
| 2 | 100nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C5, C6 |
| 2 | 10uF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C7, C8 |
| 2 | SP8M4HZGTB | KiCad:SOIC127P600X175-8N | IC1, IC2 |
| 2 | TC4427xOA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal | J2 |
The 30 most common of 36 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 55.8 × 33.6 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the SP8M4HZGTB and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the papatalla01/Projet_f1tenth repository on GitHub, at the commit this page was made from: the board is HBridge/HBridge.kicad_pcb and its schematic HBridge/HBridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask papatalla01 before reusing the design.