

Cb remote
Kicad projects
- Size
- 68.1 × 47.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 35
- Pads
- 118
- Tracks, vias
- 570, 152
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Cb remote is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 68.1 × 47.2 mm with 32 parts on 35 nets, routed with 570 tracks and 152 vias.
It is built around the LSM9DS1. Its parts include 12 resistors, 7 capacitors, 5 switches, 2 ICs and 1 diode.
Main components
1Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | mysmd:SM0603S | R1, R3, R4, R5, R6, R7 |
| 5 | 100k | mysmd:SM0603S | R8, R9, R10, R11, R12 |
| 5 | SW_PUSH | mysmd:minimum_jumper | SW1, SW2, SW3, SW4, SW5 |
| 3 | 100n | mysmd:SM0603S | C2, C3, C5 |
| 2 | N.P. | mysmd:SM0603S | C6, C7 |
| 1 | 0 | mysmd:SM0603S | L1 |
| 1 | 10n | mysmd:SM0603S | C4 |
| 1 | 10u | mysmd:SM0603S | C1 |
| 1 | 470 | mysmd:SM0603S | R2 |
| 1 | ANTENNA | myconnectors:U.FL_CONN | U2 |
| 1 | Battery | mysmd:linx_bat-hld-001 | BT1 |
| 1 | LED | mysmd:SM0603S_POL | D1 |
| 1 | LSM9DS1 | mysmd:LGA24L | U1 |
| 1 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G*** |
| 1 | PANSTAMP_NRG2 | mysmd:PANSTAMP_2 | PS1 |
| 1 | THERMISTOR | mysmd:SM0603S | TH1 |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

Similar boards
- 2 layers37.8 × 21.5 mm

- 4 layers160 × 73.2 mm

MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers43 × 43 mm

- 4 layers128 × 184 mm

Cosmicpi 1.7
CosmicPi/CosmicPiV1.7PCB
PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
219 parts14 - 6 layers44 × 118 mm

3210retro test
DasBasti/NokiaRetroFit
Retrofitting a Nokia 3210 with modern Processor
195 parts9Apache-2.0 - 4 layers35 × 44.6 mm

- 2 layers47.2 × 35 mm

- 4 layers57 × 74.3 mm

CM4
ybabs/H745FCS
Quadcopter Flight Controller based on the dual core STM32H745 Microcontroller
101 parts6
Questions
How big is the Cb remote PCB?
It measures 68.1 × 47.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cb remote use?
32 parts, built around the LSM9DS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cb remote KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is cb-remote/cb-remote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cb remote design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).