

Cb esp
Kicad projects
- Size
- 58.1 × 64.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 74
- Pads
- 151
- Tracks, vias
- 543, 233
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 6 Jul 2015
- Updated
- 26 Jul 2018
Overview
Cb esp is an open-source printed circuit board by panStamp, from the panStamp/kicad repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 58.1 × 64.2 mm with 29 parts on 74 nets, routed with 543 tracks and 233 vias.
It is built around the ESP-12E, AP7365 and BAS16. Its parts include 5 resistors, 4 capacitors, 4 ICs, 4 diodes and 2 connectors. It belongs with the ESP8266 boards of this library.
Main components
3ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesAP7365
SOT-23-5_L3.0-W1.6-P0.95-LS2.8-BLSOT-23-5 New Arrivals ROHSDiodes IncorporatedUncategorisedBAS16
SOT-231.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V Independent SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | mysmd:SM0603S | R1, R2, R3 |
| 2 | 1u | mysmd:SM0603S | C2, C3 |
| 2 | 470 | mysmd:SM0603S | R4, R5 |
| 2 | LED | mysmd:SM0603S_POL | D1, D2 |
| 2 | PANSTAMPLOGO | mymods:PANSTAMPLOGO | G***, G*** |
| 2 | SW_PUSH_SMALL | mysmd:switch-tact-noah | SW1, SW2 |
| 2 | VAL** | mymods:fiducial | fiducial, fiducial |
| 1 | 100n | mysmd:SM0603S | C4 |
| 1 | 10u | mysmd:SM0603S | C1 |
| 1 | ANTENNA | myconnectors:SMA_RightAngle_Tyco | U3 |
| 1 | AP7365 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | BAS16 | SOD323 | D4 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | CONN_01X02 | myconnectors:PWR_3A | P3 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | PROG1 |
| 1 | D_Schottky_x2_ACom_KKA | mysmd:SOT23 | D3 |
| 1 | ESP-12E | ESP-12E | U2 |
| 1 | LOGO | mysmd:oshlogo | G*** |
| 1 | LY-SK10 | LY-SK10 | U4 |
| 1 | PANSTAMP_MINIBAT | mymods:minibat | PS2 |
| 1 | PANSTAMP_NRG2 | mysmd:PANSTAMP_2 | PS1 |
More from panStamp/kicad
12- 4 layers33.1 × 64.7 mm

- 2 layers121.9 × 86 mm

- 4 layers81 × 76 mm

- 2 layers113 × 180 mm

- 4 layers33.1 × 64.7 mm

- 2 layers91.9 × 86 mm

- 4 layers81 × 76 mm

- 4 layers81 × 76 mm

- 4 layers75 × 95 mm

- 4 layers50.1 × 70.1 mm

- 4 layers55 × 40 mm

- 4 layers25.4 × 55.8 mm

Similar boards
- 2 layers30.5 × 53.9 mm

EdisonBlock 915MHz
EnhancedRadioDevices/915MHzEdisonExplorer
A 915MHz block for the Intel Edison.
117 parts26 - 2 layers26.5 × 26.8 mm

- 4 layers90 × 44.8 mm

- 2 layers30.5 × 44.4 mm

EdisonBlockTemplate
mogar/EdisonBlockTemplate
A KiCAD template for an Intel Edison Block (works with SparkFun block form factor)
17 parts - 2 layers17.8 × 22.9 mm

ATTinyX12
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
27 parts56Apache-2.0 - 2 layers125 × 125 mm

Jbc station
hrandib/jbc_station
3 channel universal soldering station for T12, T115, T210, T245, T470 handles
290 parts17GPL-3.0 - 2 layers100 × 75 mm

- 4 layers165 × 160 mm

Questions
How big is the Cb esp PCB?
It measures 58.1 × 64.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cb esp use?
29 parts, built around the ESP-12E, AP7365 and BAS16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cb esp KiCad files?
From the panStamp/kicad repository on GitHub, at the commit this page was made from: the board is cb-esp/cb-esp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cb esp design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).