Skip to the content
2 layers100 × 75 mmEXOTIC AVR Kit, the printed circuit board in 3D

AVR Dev. Kit based on the ATMEGA 32-A microcontroller

Size
100 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
79
Pads
223
Tracks, vias
374, 31
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
14 Dec 2023
Updated
24 Aug 2024

Overview

EXOTIC AVR Kit is an open-source printed circuit board by Morad-T, from the Morad-T/EXOTIC-AVR-Kit repository on GitHub. It is a 2-layer board of 100 × 75 mm with 57 parts on 79 nets, routed with 374 tracks and 31 vias.

It is built around the ATMEGA32A-PU, CH340C and AMS1117-3.3, with the AMS1117-5.0, LM339 and AO3401A among its other parts. Its parts include 16 capacitors, 9 connectors, 8 resistors, 5 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

7

README

README.md

AVR Kit

AVR Dev. Kit based on the ATmega32A

Logo

Features

  • Only 2 Layer PCB
  • Can accomodate ZIF or normal 40-Pin sockets
  • Over Current Protection
  • CH340C USB to UART Interface
  • Power Rail Selector
  • Direct 10-Pin ISP Interface

Yet To Be Done

  • ICSP Header
  • EMC Simulations

Parts

57
QtyValueFootprintReferences
9100 nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC3, C4, C9, C10, C12, C13, C14, C15, C16
410 kΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R5
4MountingHoleMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
30 ΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R7, R8
310 µFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC5, C6, C11
222 pFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2
222 µFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC7, C8
110 µHInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderL1
116 MHzM's Library:Crystal_HC49-4H_Vertical_CenteredY1
13.3 V HeadersConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ9
1470 ΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4
15 V HeadersConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ10
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1AO3401APackage_TO_SOT_SMD:SOT-23_HandsolderingQ1
1ATmega32A-PM's Library:ZIF_Socket_40_Circular_PadsU1
1AVR-ISP-10Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1BAS16Package_TO_SOT_SMD:SOT-23_HandsolderingD3
1Barrel_Jack_SwitchM's Library:BarrelJack_HorizontalJ2
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU6
1FuseM's Library:Fuseholder_with_Cover_5x20mm_HorizontalF1
1LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1LM339Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU4
1LOGOM's Library:TeamExotic_Logo_H22mmG***
1LOGOM's Library:TeamExotic_Logo_H30mmG***
1LOGOLOGOG***
1PPTC BypassJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1Polyfuse_SmallFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF2
1Port AConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ4
1Port BConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ5
1Port C + D7Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_VerticalJ6
1Port DConnector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ7
1SHLDJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1SW_DPDT_x2M's Library:SW_Push_DPDT_Toggle_7.0mmSW2
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1
1USB_BM's Library:USB_B_Connector_HorizontalJ3

The 56 most common of 57 parts.

Similar boards

  • 4 layersIONPAK1, the printed circuit board in 3D

    IONPAK1

    m-labs/ionpak

    A modern, low-cost universal controller for hot-cathode ionization vacuum gauges. (WIP)

    246 parts23
  • 4 layers70 × 70 mmPF233-CB1, the printed circuit board in 3D

    PF233-CB1

    sappystick/ARX

    58 parts
  • 4 layers62 × 60.8 mmPcbcax, the printed circuit board in 3D

    Pcbcax

    7bwiiza/Robot-creation

    Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB

    58 parts
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers62.9 × 88.6 mmBit block, the printed circuit board in 3D

    Bit block

    Citrullin/Sovereign_Bunny_Stack

    From web 3 unicorn fantasy to federated web 2.5 reality.

    169 parts4
  • 2 layers43.3 × 62.9 mmSumo Geral Modular, the printed circuit board in 3D

    Sumo Geral Modular

    project-neon/Dory

    Projeto de robô de sumô da Neon para 500g

    54 parts3MIT
  • 2 layers99.1 × 33.5 mmEcu v2, the printed circuit board in 3D

    Ecu v2

    deninur2427/ecu_pnm

    Custom Engine Control Unit for LPG

    60 parts2MIT
  • 4 layers60 × 85 mmVehicleVCU PCB, the printed circuit board in 3D

    VehicleVCU PCB

    nsm81/VehicleVCU_PCB

    A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.

    86 parts1

Questions

How big is the EXOTIC AVR Kit PCB?

It measures 100 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EXOTIC AVR Kit use?

57 parts, built around the ATMEGA32A-PU, CH340C, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EXOTIC AVR Kit KiCad files?

From the Morad-T/EXOTIC-AVR-Kit repository on GitHub, at the commit this page was made from: the board is [EXOTIC] AVR Kit.kicad_pcb and its schematic Power Management Circuitry.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EXOTIC AVR Kit design in my own project?

Its repository states no licence, so its author keeps all rights: ask Morad-T before reusing the design.