

I2CBoard
Flexible Hardware Platform for 868MHz Sensors and Actors
- Size
- 20 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 18
- Pads
- 72
- Tracks, vias
- 158, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Jul 2017
- Updated
- 8 Mar 2020
Overview
I2CBoard is an open-source printed circuit board by pa-pa, from the pa-pa/HMSensor repository on GitHub. It is a 2-layer board of 20 × 30 mm with 19 parts on 18 nets, routed with 158 tracks and 6 vias.
It is built around the BMP180, BMP280 and SHT10, with the TSL2561T and JUMPER3 among its other parts. Its parts include 5 ICs, 3 capacitors, 3 resistors and 3 connectors. It belongs with the radio and wireless and sensors and measurement boards of this library.
Main components
5BMP180
LGA-7LGA-7 Pressure Sensors ROHSBosch SensortecPressure SensorsBMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsSHT10
SMD-40℃~+123.8℃ 0%RH~100%RH 12bit 2.4V~5.5V 4.5%RH 550uA Factory calibration、Built-in heater、Derived quantity calculation、Temperature compensation I2C ±0.5℃ SMD Temperature and Humidity Sensor ROHSSensirionUncategorisedTSL2561T
TMB-6-30℃~70℃ 1.35mm 16bit 2.6mm 2.7V~3.6V 3.2uA 3.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger TMB-6 Ambient Light Sensors ROHSAdvanced Monolithic SystemsAmbient Light SensorsJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mdHMSensor
Flexible and tiny (40x20mm) Hardware Platform for 868MHz Sensors and Actors.
It comes in tow different variants:
- StepUp: For Batter or PowerSupply usage
- CR2032: For even smaller coin battery applications

Extensible with AddOn-Boards.

- Some (german) documentation is available at https://asksinpp.de/Projekte/psi/HMSensor
- Helper PCB for flashing: https://github.com/psi-4ward/HMSensor-FlashStation
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3 |
| 3 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3 |
| 2 | Contacts | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P1, P6 |
| 2 | JUMPER3 | Connect:GS3 | JP1, JP2 |
| 1 | BMP180 | acronet:LGA_BMP180 | U3 |
| 1 | BMP280 | manuf:BOSCH_BMP280 | U5 |
| 1 | Contacts | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P2 |
| 1 | DHT11/22 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.00mm | U4 |
| 1 | JUMPER | Connect:GS2 | JP3 |
| 1 | SHT10 | sht1x:SHT1x | U1 |
| 1 | TSL2561 | tsl256x:TSL256x | U2 |
The 17 most common of 19 parts.
More from pa-pa/HMSensor
4- 2 layers47.8 × 50.8 mm

- 2 layers20 × 30 mm

- 2 layers20 × 40 mm

- 2 layers20 × 40 mm

Similar boards
- 2 layers65 × 64 mm

- 4 layers50.1 × 70.1 mm

- 4 layers86 × 78 mm

OutdoorMeasureUnit
Tepetop/Weather-Station
Lokalny agent Python do analizy i edycji kodu STM32, z automatyczną kompilacją trzech wariantów projektu i testami hosta.
51 parts - 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 4 layers68.1 × 66 mm

Ambient
lab11/signpost
Exploring what happens when you put computers on sign posts.
63 parts97Apache-2.0 - 6 layers48.4 × 48.4 mm

Solar Panel Z-
PyCubed-Mini/avionics-solarpanels
Solar panel boards for the PyCubed-Mini PocketQube platform
88 parts2 - 2 layers95.9 × 27.8 mm

Opsx x
ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…
74 parts2GPL-3.0 - 4 layers160 × 100 mm

OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts
Questions
How big is the I2CBoard PCB?
It measures 20 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the I2CBoard use?
19 parts, built around the BMP180, BMP280, SHT10 and TSL2561T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2CBoard KiCad files?
From the pa-pa/HMSensor repository on GitHub, at the commit this page was made from: the board is AddOns/I2CBoard/I2CBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2CBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask pa-pa before reusing the design.