
Gimlet mgmt bringup
oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab
Gimletlet is an open-source printed circuit board by oxidecomputer, from the oxidecomputer/hw-gimletlet repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 58 × 57 mm with 59 parts on 165 nets, routed with 1,264 tracks and 69 vias.
Its parts include 22 capacitors, 22 resistors, 5 connectors, 4 diodes and 1 IC. It belongs with the STM32 boards of this library.
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards.
In active use for Hubris development and as a Swiss Army Knife around the lab. Generally when someone is speaking about a "gimletlet" the mean gimletlet2 "Glorified Gimletlet" as a vanishingly small number of gimletlet1's were built and used for some very early network bring-up.

Some design notes for gimletlet2 More design notes for gimletlet2
Some mechanical specs
The OG gimletlet. Same CPU, nothing else is the same :)
very limited use, very limited quantity

very limited use, very limited quantity
Pairs with the gimletlet-1

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0µ1 | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 +1 |
| 11 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R12, R20, R21, R22 |
| 4 | 68 | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R19 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15 |
| 2 | 11p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 2µ2 100mR | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 1 | 4µ7 | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Conn_02x15_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x15_P2.54mm_Vertical | J2 |
| 1 | Conn_02x16_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J1 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | LOLNO | grumpy:Oxide_Board_Identifier_33x7mm | FID1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | RESET | c-and-k-pts851:PTS815 | SW1 |
| 1 | ROM | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | STM32H753IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |

oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

M17-Project/Module_17
M17 modem board for 9600-baud capable radios




It measures 58 × 57 mm and has 4 copper layers, 1.6 mm thick.
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oxidecomputer/hw-gimletlet repository on GitHub, at the commit this page was made from: the board is gimletlet1/gimletlet.kicad_pcb and its schematic gimletlet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).