

Scarab
Speed controller and receiver for small robots
- Size
- 25 × 40 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 59
- Nets
- 56
- Pads
- 264
- Tracks, vias
- 397, 116
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Mar 2020
- Updated
- 18 Jun 2026
Overview
Scarab is an open-source printed circuit board by MarkR42, from the MarkR42/malenki-nano repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 25 × 40 mm with 59 parts on 56 nets, routed with 397 tracks and 116 vias.
It is built around the A71X05AQFI/Q, DRV8243HQRXYRQ1 and CL31A226KAHNNNE, with the LQW15AN4N7D10D, 19-217/BHC-ZL1M2RY/3T and KT-0603R among its other parts. Its parts include 23 capacitors, 16 resistors, 5 ICs, 5 connectors and 3 inductors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
6A71X05AQFI/Q
QFN-20-EP(4x4)QFN-20-EP(4x4) RF Transceiver ICs ROHSAMICCOM ElecRF Transceiver ICsDRV8243HQRXYRQ1
VQFN-HR-14(3x4.5)VQFN-HR-14(3x4.5) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversCL31A226KAHNNNE
120622uF 25V X5R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTLQW15AN4N7D10D
04024.7nH 51mΩ 800mA Unshielded Inductor 0402 Power Inductors ROHSMurataPower Inductors19-217/BHC-ZL1M2RY/3T
0603-40℃~+85℃ 110mW 120° 2.8V 24.5mcd~28.5mcd 465nm~475nm 468nm 5mA Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - DiscreteKT-0603R
0603-40℃~+85℃ 1.6mm x 0.8mm square LED 1.8V~2.4V 120° 20mA 300mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - Discrete
README
README.mdMalenki-Nano
Malenki-Nano is a DC electronic speed controller and receiver for small robots.
It is compatible with the Flysky / Turnigy AFHDS-2A protocol transmitters.
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C8, C12, C13, C16, C17, C22, C23 |
| 4 | 22uF 25V | Capacitor_SMD:C_1206_3216Metric | C1, C5, C6, C7 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R7, R8 |
| 3 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C14, C15 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R9, R10 |
| 3 | 470R | Resistor_SMD:R_0402_1005Metric | R1, R5, R6 |
| 2 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 4.7nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2, L3 |
| 2 | Conn_01x02_Male-Connector | malenki-nano:beetlemotor | J4, J5 |
| 2 | DNP | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | DRV8243HQRXYRQ1 | malenki-nano:RXY0014A-MFG | U4, U5 |
| 2 | R_SLEWRATE DNP | Resistor_SMD:R_0402_1005Metric | R13, R15 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 1 | 16mhz Seiko Epson Q24FA20H0051200 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 22pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 47R | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 560pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18 |
| 1 | A7105 | malenki-nano:a7105-QFN-20 | U1 |
| 1 | AP2205-33Y-13 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | ATTiny1616-MNR | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U3 |
| 1 | Conn_01x02 | malenki-nano:wirepad_2 | J3 |
| 1 | Conn_01x02_Male-Connector | malenki-nano:beetlepower | J1 |
| 1 | Conn_01x08_Male | malenki-nano:SOIC_clipProgSmall | J2 |
| 1 | LED Blue | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | nFAULT | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | nSLEEP | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | ~ | malenki-nano:malenki_antenna | AE1 |
More from MarkR42/malenki-nano
7- 4 layers19 × 32 mm

- 4 layers19 × 32 mm

- 2 layers19 × 24.1 mm

- 2 layers19 × 24.1 mm

- 2 layers19 × 24.1 mm

- 2 layers19 × 24.1 mm

- 2 layers15.2 × 12.7 mm

Similar boards
- 4 layers56.7 × 45.1 mm

- 2 layers228.6 × 78.7 mm

- 4 layers88 × 58 mm

- 4 layers33.5 × 66.8 mm

Net bmp
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)
97 parts3GPL-3.0 - 6 layers84.5 × 56 mm

VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3 - 4 layers60 × 25 mm

- 4 layers20.3 × 48.3 mm

BlueMacro
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
39 parts100BSD-3-Clause - 4 layers76.5 × 76.9 mm

Questions
How big is the Scarab PCB?
It measures 25 × 40 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Scarab use?
59 parts, built around the A71X05AQFI/Q, DRV8243HQRXYRQ1, CL31A226KAHNNNE and LQW15AN4N7D10D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scarab KiCad files?
From the MarkR42/malenki-nano repository on GitHub, at the commit this page was made from: the board is hardware/scarab/scarab.kicad_pcb and its schematic hardware/malenki-hv/malenki-hv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scarab design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).