Skip to the content
4 layers96 × 100 mmOtterCastAmp, the printed circuit board in 3D

OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

Size
96 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
272
Nets
276
Pads
1,228
Tracks, vias
3,045, 758
Pours
27
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Feb 2021
Updated
17 Jun 2024

Overview

OtterCastAmp is an open-source printed circuit board by Ottercast, from the Ottercast/OtterCastAmp repository on GitHub, published under the MIT licence. It is a 4-layer board of 96 × 100 mm with 272 parts on 276 nets, routed with 3,045 tracks and 758 vias.

It is built around the AP6236, SY8089AAAC and TAS5825MRHBR, with the STUSB4500Q, MIC5501-3.0YM5-TR and MP2303ADN among its other parts. Its parts include 112 capacitors, 89 resistors, 13 inductors, 12 ICs and 9 connectors. It belongs with the audio and music and power boards of this library.

Main components

12

README

README.md

OtterCastAmp

OtterCastAmp is an open-source Sonos Amp replacement, based on a Sochip S3 SoC and pulseaudio sink/source.

How do I get one?

We are currently planning a small batch production run, stay tuned. [editors notes: It is 2024 now and noone really expected how bad covid would affect the supply chain. While all parts are available again, we are only slowly getting interested in this project again]

You don't want to wait? You can of course run a small batch on your own! Please have a look into the gerber folder, a batch size of just 5 (and up to 30) boards is supported by JLC.

Installation & Configuration

After downloading and flashing the image, OtterCastAmp can either be configured via the config.ini file or via the web-interface.

Screenshot of the webinterface provided by the OtterCastAmp

Check out our Documentation for more information!

Schematics?

Schematics!

Team

Do you plan a PoE version?

Maybe. (25W of power is not enough and >50W isn't popular)

Status

HW v1.0 is ordered and we already found bugs fixed in v1.2 (not ordered yet) Tested & working:

  • Audio Speaker Out

  • Audio Line In

  • Bluetooth Audio In

  • USB PD

  • WiFi

  • Ethernet

  • Display

  • Uart

  • Webinterface (config)

  • Shairport-sync

  • Pulseaudio sink

  • Pulseaudio source

  • snapcast

License

MIT Licensed HW

Note: The following files or directories are excluded from the License and are otherwise licensed

  • 3D/
  • datasheets/

Parts

272
QtyValueFootprintReferences
2910uotter:C_0603C1, C10, C12, C13, C20, C21, C22, C23, C31, C101, C107, C123, C124, C125, C126, C127 +13
28100notter:C_0402C3, C11, C16, C17, C19, C29, C39, C100, C102, C103, C104, C108, C110, C111, C119, C120 +12
2047kotter:R_0402R1, R2, R4, R10, R11, R13, R14, R15, R18, R20, R47, R48, R49, R50, R51, R52 +4
132.2kotter:R_0402R5, R6, R7, R8, R28, R36, R62, R63, R77, R79, R84, R85, R89
9100kotter:R_0402R16, R17, R23, R24, R26, R33, R34, R35, R78
9470n 25Votter:C_0603C50, C52, C56, C60, C69, C71, C75, C79, C112
80Rotter:R_0402R31, R32, R40, R41, R60, R86, R87, R88
810kotter:R_0402R37, R38, R39, R42, R43, R44, R65, R82
810uotter:L_10.4x10.4_H4.8L4, L5, L6, L7, L8, L9, L10, L11
81uotter:C_0402C40, C41, C45, C46, C47, C64, C65, C66
8680n 50VCapacitor_SMD:C_1206_3216MetricC51, C53, C57, C61, C70, C72, C76, C80
8PBTLJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
8TestPointTestPoint:TestPoint_Pad_1.0x1.0mmB1, COPI, CS, DCLK, ENAB, HSYNC, SCLK, VSYNC
622otter:R_0402R3, R12, R25, R53, R59, R64
518potter:C_0402C85, C105, C106, C109, C113
522u 50VCapacitor_SMD:C_1206_3216MetricC54, C55, C73, C74, C115
5470u 35VCapacitor_SMD:CP_Elec_10x10.5C58, C59, C77, C78, C116
4100Rotter:R_0402R27, R54, R55, R56
4100n 50Votter:C_0603C48, C49, C67, C68
451otter:R_0402R66, R67, R69, R70
31u 25Votter:C_0603C38, C92, C95
3DNPotter:R_0402R45, R68, R71
3DNPotter:C_0402C2, C86, C87
3ESD5302FPackage_TO_SOT_SMD:SOT-23D5, D6, D8
3LEDotter:LED_0603_1608Metric3V3 PG, D1, D2
2 C475204otter:C475204J5, J6
21kotter:R_0402R30, R46
2200kotter:R_0402R72, R73
222pFotter:C_0402C117, C118
2240otter:R_0402R80, R81
22u2otter:Inductor_4040L2, L3
23.2mmMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2
25.6kotter:R_0402R22, R75
2SMAJ22A Diode_SMD:D_SMAD3, D4
2SY8089AAACPackage_TO_SOT_SMD:SOT-23-5U3, U5
2TAS5825MRHBPackage_DFN_QFN:Texas_S-PVQFN-N32_EP3.45x3.45mmU9, U10
110Motter:R_0402R76
110Rotter:R_0402R83
110notter:C_0402C7
115kotter:R_0402R21
115uHotter:L_10.4x10.4_H4.8L1
11n 2kVCapacitor_SMD:C_1206_3216MetricC96
12.2uHotter:Inductor_4040L13
122kotter:R_0402R29
122uotter:Inductor_4040L12
124MHzotter:Oscillator_3225Y2
126MHzotter:Oscillator_3225Y3
13.3notter:C_0402C18
132.768kHzotter:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
168kotter:R_0402R19
16k04otter:R_0402R74
1AFA07-S10FCC-00Connector_FFC-FPC:TE_1-84952-0_1x10-1MP_P1.0mm_HorizontalJ7
1AP3019APackage_TO_SOT_SMD:SOT-23-6U8
1AP6236otter:LGA_44_12x12mm_0.9mmU11
1AllWinner-S3(FBGA-234)otter:FBGA-234(Pitch-0.65mm_Pad-0.3mm_11x11x1.08mm)U1
1CONFIGButton_Switch_SMD:SW_SPST_EVQP7CSW1
1DMP4015SSPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmQ1
1EMMC04G-S100-B08Ulib:MICRON_EMMC_153IC1
1FERRETotter:R_0805FB1
1FH26W-33S-0.3SHWConnector_FFC-FPC:Molex_502250-3391_2Rows-33Pins-1MP_P0.60mm_HorizontalJ10
1GNDAJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP11
1HR911105AConnector_RJ:RJ45_Hanrun_HR911105AJ1
1LM75BPackage_SO:VSSOP-8_3.0x3.0mm_P0.65mmU2
1LOGOottercast:ottercast_silkG***
1LOGOottercast:ottercast_enigG***
1LOGOottercast:ottercast_maskG***
1MIC5501-3.0YM5Package_TO_SOT_SMD:SOT-23-5U6
1MP2303Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU4
1Micro_SD_CardST-TF-003A:SUNTECH_ST-TF-003AJ2
1PJ-3270otter:PJ-3270J9
1STUSB4500Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mmU7
1UART1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1USBotter:USB-C 16PinJ3
1u.FLConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalAE1

Similar boards

  • 2 layers84 × 90 mmDsp amp 2to4, the printed circuit board in 3D

    Dsp amp 2to4

    kurozz/dsp_amp_2to4

    Amplifier with DSP based on TPA3116D2 and ADAU1701 with 4 outputs and stereo input.

    193 parts3
  • 4 layers49.8 × 49.8 mmOtterCam s3, the printed circuit board in 3D

    OtterCam s3

    kitspace-test-repos/kicad6-file-collection

    159 partsMIT
  • 2 layers70 × 100 mmEKCP LLP, the printed circuit board in 3D

    EKCP LLP

    Konstantin-Dudersky/plc-modules

    После открыть файл в Inkscape и изменить размер страницы

    58 parts
  • 2 layers196.2 × 67.3 mmRelControll v1.1 fix, the printed circuit board in 3D

    RelControll v1.1 fix

    sevenist/SevenistController-VTM-Hardware

    Custom PCB for the Sevenist Controller, a 64-track MIDI CC control surface built around an ESP32-S3 Zero.

    38 partsGPL-3.0
  • 2 layers133 × 88 mmSonosHack backup, the printed circuit board in 3D

    SonosHack backup

    smariel/SonosPlay1Hack

    Sonos Play:1 replacement with RaspberryPi

    58 partsCERN-OHL-W-2.0
  • 2 layersClassD, the printed circuit board in 3D

    ClassD

    aokblast/ThunderChargeXPro

    27 parts
  • 4 layers68.8 × 135.2 mmEspamp, the printed circuit board in 3D

    Espamp

    marmbrus/circuits

    127 parts

Questions

How big is the OtterCastAmp PCB?

It measures 96 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the OtterCastAmp use?

272 parts, built around the AP6236, SY8089AAAC, TAS5825MRHBR and STUSB4500Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the OtterCastAmp KiCad files?

From the Ottercast/OtterCastAmp repository on GitHub, at the commit this page was made from: the board is OtterCastAmp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the OtterCastAmp design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).