
OtterCastAmp
Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

Amplifier with DSP based on TPA3116D2 and ADAU1701 with 4 outputs and stereo input.
Dsp amp 2to4 is an open-source printed circuit board by kurozz, from the kurozz/dsp_amp_2to4 repository on GitHub. It is a 2-layer board of 84 × 90 mm with 193 parts on 110 nets, routed with 992 tracks and 516 vias.
It is built around the AOZ1282CI-2, TPA3116D2 and 24LC256-I/P, with the AMS1117-3.3, KF211R-5.0-4P and SS54 among its other parts. Its parts include 95 capacitors, 43 resistors, 11 connectors, 10 inductors and 6 ICs. It belongs with the audio and music boards of this library.
DSP Amplifier - 2 inputs 4 outputs Amplifier with DSP based on TPA3116D2 and ADAU1701 with 4 outputs and stereo input.
DSP programming can be done with SigmaStudio and needs an appropriate programmer. How to program: https://daumemo.com/how-to-program-an-analog-devices-dsp/
Hackaday.io: https://hackaday.io/project/182993-dsp-amplifier-2-inputs-4-outputs Project at PCBWAY (I get some credits if you buy the PCB from this link): https://www.pcbway.com/project/shareproject/DSP_Amplifier___2_inputs_4_outputs.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C13, C20, C24, C25, C27, C28, C31, C32, C33, C34, C36, C53, C54 +3 |
| 12 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C18, C19, C23, C26, C29, C30, C35, C37 |
| 12 | 1nF | Capacitor_SMD:C_0603_1608Metric | C51, C52, C59, C60, C61, C62, C80, C81, C88, C89, C90, C91 |
| 10 | 1uF | Capacitor_SMD:C_0603_1608Metric | C38, C39, C40, C41, C46, C67, C68, C69, C70, C75 |
| 9 | 10uH | Inductor_SMD:L_6.3x6.3_H3 | L2, L3, L4, L5, L6, L7, L8, L9, L10 |
| 9 | 56nF | Capacitor_SMD:C_0603_1608Metric | C22, C42, C43, C44, C45, C71, C72, C73, C74 |
| 8 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R26, R27, R28, R39, R40 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric | C63, C64, C65, C66, C92, C93, C94, C95 |
| 8 | 220nF | Capacitor_SMD:C_0603_1608Metric | C47, C48, C49, C50, C76, C77, C78, C79 |
| 8 | 3.3R | Resistor_SMD:R_0603_1608Metric | R29, R30, R31, R32, R41, R42, R43, R44 |
| 8 | 56.2R | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R33, R34, R35, R36 |
| 8 | 680nF | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C55, C56, C57, C58, C84, C85, C86, C87 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R7, R11, R12, R15, R16, R17 |
| 5 | JST XH-B3B | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3, POT1, POT2, POT3, POT4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 18K | Resistor_SMD:R_0603_1608Metric | R13, R14, R19 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R5, R6, R20 |
| 3 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C11, C12 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric | C14, C17 |
| 2 | 20K | Resistor_SMD:R_0603_1608Metric | R25, R37 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | C475204 | lcsc:C475204 | J4, J5 |
| 2 | INL_FILT | TestPoint:TestPoint_Pad_D1.0mm | TP9, TP10 |
| 2 | INR_FILT | TestPoint:TestPoint_Pad_D1.0mm | TP7, TP8 |
| 2 | LED | LED_THT:LED_D3.0mm | D3, D4 |
| 2 | SS54 | Diode_SMD:D_SMA | D1, D2 |
| 2 | TPA3116D2 | Package_SO:HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias | U5, U6 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 12.288MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 1pF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 24LC256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | 3V3 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP6 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 5A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 5V | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP5 |
| 1 | ADAU1701 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AOZ1282CI-2 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | DAC0 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | DAC1 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | DAC2 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | DAC3 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP4 |
| 1 | FB | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | INPUT SHORT | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Jumper Wire | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | JP2 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H5 |
| 1 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PJ-3270 | lcsc:PJ-3270 | J2 |
| 1 | POWER SWITCH | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | JP3 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | PWR | lcsc:C381116 | J1 |
| 1 | SS8550 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | W88H38L120 | dsp_amp_2to4:Aluminum_W88H38L120 | N1 |
| 1 | WP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | logo | shamiko:shamiko | LOGO1 |

Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

rmalchow/ondaire
A KiCad 10 project for a powered-speaker node: an ESP32-S3 dev board drops into a socket, an I²S DAC + class-D amp turn the stream into 40–50 W of audio, and the whole thing runs from a single USB-C cable via USB-PD.

sevenist/SevenistController-VTM-Hardware
Custom PCB for the Sevenist Controller, a 64-track MIDI CC control surface built around an ESP32-S3 Zero.

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark


mbeayou/esp32-hifi-bluetooth-speaker-pcb-board
A custom high-fidelity Bluetooth speaker PCB featuring the ESP32 (I2S), PCM5100 DAC, and TPA3116D2 Class D Amplifier. Includes Schematics, Gerber files, and BOM.

m-soori/RDC2-0020-TPA3116D2-classD-mplifier
Усилитель НЧ класса D. TPA3116D2. 2х50Вт. - включение BTL или 100Вт. включение PBTL

It measures 84 × 90 mm and has 2 copper layers, 1.6 mm thick.
193 parts, built around the AOZ1282CI-2, TPA3116D2, 24LC256-I/P and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kurozz/dsp_amp_2to4 repository on GitHub, at the commit this page was made from: the board is dsp_amp_2to4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kurozz before reusing the design.