
SonosHack backup
smariel/SonosPlay1Hack
Sonos Play:1 replacement with RaspberryPi

Sonos Play:1 replacement with RaspberryPi
SonosHack backup is an open-source printed circuit board by smariel, from the smariel/SonosPlay1Hack repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 133 × 88 mm with 58 parts on 58 nets, routed with 337 tracks and 352 vias.
It is built around the IRM-60-24, TPSM84205EAB and TAS5825MRHBR, with the TPSM84338RCJR among its other parts. Its parts include 28 capacitors, 13 resistors, 4 ICs, 4 connectors and 4 inductors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C6, C21, C23, C25, C28 |
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R8, R9, R10, R14 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C7, C8, C22 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7 |
| 4 | 10u | Inductor_SMD:1274ASH100MP3 | L1, L2, L3, L4 |
| 4 | 470n | Capacitor_SMD:C_0603_1608Metric | C9, C10, C13, C14 |
| 4 | 680n | Capacitor_SMD:C_0805_2012Metric | C11, C12, C15, C16 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric | C20, C24 |
| 2 | 47u | Capacitor_SMD:C_1206_3216Metric | C26, C27 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 2825272-2 | Connector_Molex:2825272-2 | J3 |
| 1 | 4,7u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 73,2k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | ? | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | IRM-60-24 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-60-xx_THT | U2 |
| 1 | RPI | Module:RASPBERRYPI-ZERO_RPI-ZERO | J4 |
| 1 | TAS5825MRHB | Package_DFN_QFN:Texas_RHB0032E_VQFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias | U1 |
| 1 | TPSM84205EAB | Converter_DCDC:EAB0003A | U4 |
| 1 | TPSM84338RCJR | Package_DFN_QFN:RCJ0009A-MFG | U3 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
The 53 most common of 58 parts.

smariel/SonosPlay1Hack
Sonos Play:1 replacement with RaspberryPi

Ottercast/OtterCastAmp
OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powered by any USB PD adapter for up to 100W of music.

MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.


RoboJackets/roboracing-electrical
RoboJackets RoboRacing Electrical repository


velvia-fifty/AudioThings
DIY audio-related projects of questionable quality and dubious utility; delivered in 30 minutes or less or the next one is free


JamesRop/VIMS-Accelerometer-PCB
Files for a PCB for an accelerometer circuit for an ocean glider in the ocean sensing lab at the Virginia Institute of Marine Science
It measures 133 × 88 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the IRM-60-24, TPSM84205EAB, TAS5825MRHBR and TPSM84338RCJR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the smariel/SonosPlay1Hack repository on GitHub, at the commit this page was made from: the board is SonosHack backup.kicad_pcb and its schematic SonosHack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).