Skip to the content
2 layers65 × 35 mmRattrapage Option Maker, the printed circuit board in 3D

Rattrapage Option Maker

osmane-amine/Rattrapage_maker

L'objectif est de réaliser un PCB et un modèle 3D du chassis d'un robot auto-équilibré à 2 roues, de type Segway.

Size
65 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
59
Pads
176
Tracks, vias
43, 4
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 May 2025
Updated
23 May 2025

Overview

Rattrapage Option Maker is an open-source printed circuit board by osmane-amine, from the osmane-amine/Rattrapage_maker repository on GitHub. It is a 2-layer board of 65 × 35 mm with 34 parts on 59 nets, routed with 43 tracks and 4 vias.

It is built around the LSM6DSM. Its parts include 16 capacitors, 6 resistors, 5 connectors and 3 ICs.

Main components

1

README

README.md

Rattrapage_maker

L'objectif est de réaliser un PCB et un modèle 3D du chassis d'un robot auto-équilibré à 2 roues, de type Segway.

Par manque de temps, le routage du PCB et le chassis sont inachevés, cependant le schématic ainsi que l'assignation des empreintes sont terminées.

L'alimentation est gérée par une cellule de batterie LiPo, et un convertisseur boost.

Parts

34
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0504_1310MetricC5, C6, C7, C8, C9, C10, C13, C14, C15, C16
4220mResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4
4MountingHole_PadMountingHole:MountingHole_2.5mm_PadH1, H2, H3, H4
2100uCapacitor_SMD:C_0504_1310MetricC11, C12
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6
22.2uCapacitor_SMD:C_0504_1310MetricC1, C2
222nCapacitor_SMD:C_0504_1310MetricC3, C4
2PwrConn_01x02_SocketConnector_Molex:Molex_KK-396_A-41792-0002_1x02_P3.96mm_HorizontalJ3, J5
2~Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mmU3, U4
102x20_RPi_ShieldConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ4
1Conn_stepper_1Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_HorizontalJ1
1Conn_stepper_2Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_HorizontalJ2
1LSM6DSMPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU1

Similar boards

  • 2 layers38.6 × 6.6 mmArtDecoEarrings, the printed circuit board in 3D

    ArtDecoEarrings

    sawaiz/artDecoEarrings

    Shimmering electronic earrings in the Art Deco style.

    20 parts18
  • 4 layers135.8 × 149.3 mmTapBadgeV2, the printed circuit board in 3D

    TapBadgeV2

    Xasin/TapBadgeV2

    The second, far more ambitious version of the TapBadge wearable

    110 parts6GPL-3.0
  • 4 layers45 × 45 mmDroneFluxx, the printed circuit board in 3D

    DroneFluxx

    kyleRhess/DroneFluxx

    ARM-based custom flight controller firmware + hardware.

    58 parts2
  • 4 layers50 × 75.2 mmRpiFly v3, the printed circuit board in 3D

    RpiFly v3

    r3dpath/RpiFly_Hardware

    While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.

    108 parts1
  • 4 layers30 × 37.3 mmSensorHub 2.0, the printed circuit board in 3D

    SensorHub 2.0

    artur-erik/Manikin_Hardware

    Sensors and SensorHub PCB Modules. Based on RA4E2

    71 parts
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    benmcnelly/walter-hardware

    This repository contains all hardware information about Walter and shields

    154 partsGPL-3.0
  • 6 layers21 × 36 mmPPG Watch, the printed circuit board in 3D

    PPG Watch

    gavin4d/PPG-Watch

    Smart watch with a photoplethysmography analog front end and e-paper display

    89 parts
  • 2 layers42 × 116 mmDrink water, the printed circuit board in 3D

    Drink water

    heidtn/drinkmoarwater

    51 partsMIT

Questions

How big is the Rattrapage Option Maker PCB?

It measures 65 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rattrapage Option Maker use?

34 parts, built around the LSM6DSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rattrapage Option Maker KiCad files?

From the osmane-amine/Rattrapage_maker repository on GitHub, at the commit this page was made from: the board is PCB/Rattrapage_Option_Maker/Rattrapage_Option_Maker.kicad_pcb and its schematic PCB/Rattrapage_Option_Maker/Rattrapage_Option_Maker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rattrapage Option Maker design in my own project?

Its repository states no licence, so its author keeps all rights: ask osmane-amine before reusing the design.