
ArtDecoEarrings
sawaiz/artDecoEarrings
Shimmering electronic earrings in the Art Deco style.

L'objectif est de réaliser un PCB et un modèle 3D du chassis d'un robot auto-équilibré à 2 roues, de type Segway.
Rattrapage Option Maker is an open-source printed circuit board by osmane-amine, from the osmane-amine/Rattrapage_maker repository on GitHub. It is a 2-layer board of 65 × 35 mm with 34 parts on 59 nets, routed with 43 tracks and 4 vias.
It is built around the LSM6DSM. Its parts include 16 capacitors, 6 resistors, 5 connectors and 3 ICs.
L'objectif est de réaliser un PCB et un modèle 3D du chassis d'un robot auto-équilibré à 2 roues, de type Segway.
Par manque de temps, le routage du PCB et le chassis sont inachevés, cependant le schématic ainsi que l'assignation des empreintes sont terminées.
L'alimentation est gérée par une cellule de batterie LiPo, et un convertisseur boost.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0504_1310Metric | C5, C6, C7, C8, C9, C10, C13, C14, C15, C16 |
| 4 | 220m | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 2 | 100u | Capacitor_SMD:C_0504_1310Metric | C11, C12 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 2.2u | Capacitor_SMD:C_0504_1310Metric | C1, C2 |
| 2 | 22n | Capacitor_SMD:C_0504_1310Metric | C3, C4 |
| 2 | PwrConn_01x02_Socket | Connector_Molex:Molex_KK-396_A-41792-0002_1x02_P3.96mm_Horizontal | J3, J5 |
| 2 | ~ | Package_SO:HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm | U3, U4 |
| 1 | 02x20_RPi_Shield | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | Conn_stepper_1 | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_stepper_2 | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J2 |
| 1 | LSM6DSM | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |

sawaiz/artDecoEarrings
Shimmering electronic earrings in the Art Deco style.

Xasin/TapBadgeV2
The second, far more ambitious version of the TapBadge wearable


r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.


benmcnelly/walter-hardware
This repository contains all hardware information about Walter and shields

gavin4d/PPG-Watch
Smart watch with a photoplethysmography analog front end and e-paper display

It measures 65 × 35 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the LSM6DSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the osmane-amine/Rattrapage_maker repository on GitHub, at the commit this page was made from: the board is PCB/Rattrapage_Option_Maker/Rattrapage_Option_Maker.kicad_pcb and its schematic PCB/Rattrapage_Option_Maker/Rattrapage_Option_Maker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask osmane-amine before reusing the design.