Skip to the content
2 layers194.3 × 428.1 mmJeaex right, the printed circuit board in 3D

assembled-keyboard.stl - 3d model of assembled keyboard.

Size
194.3 × 428.1 mm
Copper layers
2
Thickness
1.5 mm
Parts
84
Nets
53
Pads
249
Tracks, vias
342, 3
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Jan 2021
Updated
20 Jan 2021

Overview

Jeaex right is an open-source printed circuit board by osenchenko, from the osenchenko/jiaex repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 194.3 × 428.1 mm with 84 parts on 53 nets, routed with 342 tracks and 3 vias.

It is built around the 1N4148W. Its parts include 35 diodes, 35 switches, 3 resistors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

JiaEX - split keyboard for extended alphabets.

assembled-keyboard.stl - 3d model of assembled keyboard.

Features

  • enough keys for placing on base layer all letters for extended alphabets (alphabets with more than 26 letters).
  • plenty of keys for playing with different variants to find your best setup.
  • one keyboard for all operating systems. Switch between settings for different operating systems with a shortcut (currently settings for Linux and Windows are implemented).
  • used AT90USB1286 with 128 KB memory. No limits for storing settings.
  • wide choice of keycaps. The keyboard is designed for maximum use of keycap sets from standard keyboards. 1.75U keys of thumb cluster and 1.5U vertical keys can be replaced with 1.5U or 1.25U keys in any combination.
  • wrist pad is rigidly attached to the keyboard. The keyboard is not intended to be used without a wrist pad.
  • the display shows current default layout (for example Linux) and current active layer plus Caps Lock state.
  • powered by QMK.

Layout

keyboard-layout-editor.com

Build guide

Folders

  • case - stl-files for 3d printing case and wrist pads.
    Case and wrist pads are designed by Alexander_St enginemojo@gmail.com.
  • datasheets - datasheets for some used parts
  • firmware - source files for QMK firmware
  • pcb - KiCAD source and gerber files for manufacturing PCB.
  • plate - dxf for laser cutting metal plate.

Firmware

  • install qmk
  • copy folder jiaex from firmware to keyboards folder of qmk installation
  • Until pull request #11487 is not merged in QMK master you must apply this pull request by yourself.
  • run qmk flash -kb jiaex -km default

PCB and Case

Kicad libraries used:

Bill of materials

NameValueQuantity
Microcontroller boardTeensy ++ 2.02
SMD Diode1N4148 [SOD-123]68
SMD Resistor 120630K2
SMD Resistor 12063K4
SMD Resistor 120610K1
Jack RJ-22215875-1, Conn RJ-22 F 4 POS 1.02mm Solder RA Thru-Hole 4 Terminal 1 Port Cat 3 T/R2
OLED display0.91 inch OLED Module 128x32, I2C1
Plug for OLED displayPLS-4R (DS1022-1x4R)1
Key switchAny Cherry MX compatible68
Key stabilyzersAny Cherry MX compatible, plate mount6
4-wire phone cable with RJ11 (TP-4P4C) jacks.Max length of cable - 11 cm.1
Rubber feetAt your own choice. I use RF-3004---
Metal plate. Thickness1.5 mm2

Screws

NameDiameter, mmLength, mmImageQuantityNotes
Self-tapping screw for plastic, countersunk head, blunt end, Phillips head, full thread, ART 909038..1020Drill the hole with a 2 mm drill before insert screw.
Self-tapping screw DIN 7981 FH (A2) with a blunt end with a half-cylindrical head, head Phillips ST2.22.26.5..88Drill the hole with a 1.2 mm drill before insert screw.

Inspiration

Keyboard is inspired by the following keyboards:

  • Jian
  • Jiran
  • Ultimate Hacking Keyboard
  • Ergodox

Layout inspired by ideas of:

Parts

84
QtyValueFootprintReferences
351N4148WDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19
23KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R3
10CherryMX:SW_Cherry_MX_1.00u_PlateSW25
130KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1
14P4CUGL:4P4C_Jack_0955012441J1
16CherryMX:SW_Cherry_MX_1.00u_PlateSW5
17CherryMX:SW_Cherry_MX_1.00u_PlateSW10
18CherryMX:SW_Cherry_MX_1.00u_PlateSW15
19CherryMX:SW_Cherry_MX_1.00u_PlateSW20
1<CherryMX:SW_Cherry_MX_1.00u_PlateSW18
1>CherryMX:SW_Cherry_MX_1.00u_PlateSW23
1AltCherryMX:SW_Cherry_MX_1.25u_PlateSW24
1CmdCherryMX:SW_Cherry_MX_1.25u_PlateSW19
1Conn_01x04_MaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1CtrlCherryMX:SW_Cherry_MX_2.25u_PlateSW29
1FR1CherryMX:SW_Cherry_MX_1.00u_PlateSW1
1FR2CherryMX:SW_Cherry_MX_1.50u_PlateSW2
1FR3CherryMX:SW_Cherry_MX_1.50u_PlateSW3
1FR4CherryMX:SW_Cherry_MX_2.00u_PlateSW30
1FnCherryMX:SW_Cherry_MX_1.75u_PlateSW4
1HCherryMX:SW_Cherry_MX_1.00u_PlateSW7
1ICherryMX:SW_Cherry_MX_1.00u_PlateSW16
1JCherryMX:SW_Cherry_MX_1.00u_PlateSW12
1KCherryMX:SW_Cherry_MX_1.00u_PlateSW17
1LCherryMX:SW_Cherry_MX_1.00u_PlateSW22
1MCherryMX:SW_Cherry_MX_1.00u_PlateSW13
1ModCherryMX:SW_Cherry_MX_1.75u_PlateSW9
1NCherryMX:SW_Cherry_MX_1.00u_PlateSW8
1OCherryMX:SW_Cherry_MX_1.00u_PlateSW21
1PCherryMX:SW_Cherry_MX_1.00u_PlateSW26
1RTNCherryMX:SW_Cherry_MX_2.25u_PlateSW35
1SPCCherryMX:SW_Cherry_MX_1.75u_PlateSW14
1ShiftCherryMX:SW_Cherry_MX_2.75u_PlateSW33
1Teensy++2.0_(C)Teensy:Teensy2.0++U1
1UCherryMX:SW_Cherry_MX_1.00u_PlateSW11
1YCherryMX:SW_Cherry_MX_1.00u_PlateSW6
1БCherryMX:SW_Cherry_MX_1.00u_PlateSW31
1ЖCherryMX:SW_Cherry_MX_1.00u_PlateSW27
1ХCherryMX:SW_Cherry_MX_1.00u_PlateSW34
1ЭCherryMX:SW_Cherry_MX_1.00u_PlateSW32
1ЮCherryMX:SW_Cherry_MX_1.00u_PlateSW28

The 76 most common of 84 parts.

More from osenchenko/jiaex

2
  • 2 layers166.1 × 428 mmJeaex left, the printed circuit board in 3D

    Jeaex left

    osenchenko/jiaex

    assembled-keyboard.stl - 3d model of assembled keyboard.

    80 parts9GPL-3.0
  • 2 layers166.1 × 428 mmJeaex left bkp-01, the printed circuit board in 3D

    Jeaex left bkp-01

    osenchenko/jiaex

    assembled-keyboard.stl - 3d model of assembled keyboard.

    71 parts9GPL-3.0

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 4 layers95.6 × 73.6 mmMathpad, the printed circuit board in 3D

    Mathpad

    Summa-Cogni/Mathpad

    A mathematical keypad for students and professionals

    93 parts243
  • 2 layers141.5 × 83 mmRolio, the printed circuit board in 3D

    Rolio

    MickiusMousius/Rolio46Keyboard

    A split wireless keyboard based on the Corne and Sofle

    110 parts236MIT
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers229.8 × 102.6 mmBw2, the printed circuit board in 3D

    Bw2

    hazels-garage/bad-wings

    Bad Wings

    107 parts107CC-BY-SA-4.0

Questions

How big is the Jeaex right PCB?

It measures 194.3 × 428.1 mm and has 2 copper layers, 1.5 mm thick.

What parts does the Jeaex right use?

84 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jeaex right KiCad files?

From the osenchenko/jiaex repository on GitHub, at the commit this page was made from: the board is pcb/source/right/jeaex-right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jeaex right design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).