

RPM Counter PCB
- Size
- 157 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 58
- Pads
- 167
- Tracks, vias
- 96, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Dec 2024
- Updated
- 3 Feb 2025
Overview
RPM Counter PCB is an open-source printed circuit board by oselcukyatagan, from the oselcukyatagan/Circuits repository on GitHub. It is a 2-layer board of 157 × 31.8 mm with 33 parts on 58 nets, routed with 96 tracks and 0 vias.
It is built around the SC39-11EWA, 74HC00D and 74HC04D, with the AO3400A, AO3401A and PN2222A among its other parts. Its parts include 17 resistors, 9 ICs, 3 capacitors and 3 transistors.
Main components
6SC39-11EWA
DIP-100.39 1 13mmx10mmx7mm 7 Segment 75mW Common Cathode Red DIP-10 LED Segment Displays ROHSKingbrightLED Segment Displays74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC04D
SOP-14-40℃~+125℃ 1 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV、400mV 14ns@6V,50pF 2V~6V 2uA 5.2mA 5.2mA 500mV~1.8V 6 74HC SOIC-14 Inverters ROHSNexperiaInvertersAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 2 | 74LS48 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U3, U4 |
| 2 | 74LS90 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1, U2 |
| 2 | SC39-11EWA | Display_7Segment:Sx39-1xxxxx | U7, U8 |
| 1 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 10nF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | BT1 |
| 1 | 74HC00 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U10 |
| 1 | 74HC04 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U5 |
| 1 | 8658 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | AO3400A | Package_TO_SOT_THT:TO-92L_HandSolder | Q2 |
| 1 | AO3401A | Package_TO_SOT_THT:TO-92_HandSolder | Q3 |
| 1 | LM555xN | Package_DIP:DIP-8_W7.62mm | U9 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
Similar boards
- 2 layers160 × 100 mm

- 2 layers87.6 × 79.4 mm

Tempcontrolfan
hemilth2257/Temperature-Controlled-DC-Fan
Temperature Controlled DC fan built with an Arduino Nano, LM358 op-amp, and a custom KiCad PCB
20 parts1 - 2 layers41.9 × 47.7 mm

7-segment LED 02 kicad
mrmtmtk03/7-segment_LED
なお、点灯させるためには、この他にArduino UNOが必要である。 ## プリント基板の作成 設計した基板データは本リポジトリで公開している。 例えば、JLCPCBであればこのZIPファイル 7-segmentLED02kicad\production\7-segmentLED02kicad.zipをgerber fileとしてアップロードすることで基板の発注ができる。
15 parts - 2 layers178 × 711 mm

- 2 layers71.4 × 128 mm

- 2 layers60.5 × 85.5 mm

Line Sensor Board
re3Dev/Extrusion-Metrology
PCB with a main purpose of a low-cost, dedicated 1D metrology sensor specifically for a Klipper printer, use controlled illumination to get a high-resolution bead cross-section without running full machine vision, and…
31 parts1 - 4 layers184.2 × 169.5 mm

- 2 layers301 × 262.6 mm

1 Sistema FINAL
felipesantiagoach-ops/cdp1802-8bit-computer
8-bit microcomputer based on the RCA CDP1802, the first CMOS microprocessor. Three stages designed in KiCad: two built and tested (assembly programs, UART, Tiny BASIC, Elf/OS) and a final design with an ADC, I²C/SPI…
207 parts
Questions
How big is the RPM Counter PCB PCB?
It measures 157 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RPM Counter PCB use?
33 parts, built around the SC39-11EWA, 74HC00D, 74HC04D and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RPM Counter PCB KiCad files?
From the oselcukyatagan/Circuits repository on GitHub, at the commit this page was made from: the board is RPM Counter/RPM Counter PCB.kicad_pcb and its schematic RPM Counter/rpm-counter-sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RPM Counter PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask oselcukyatagan before reusing the design.