Skip to the content
2 layers65 × 56.5 mmRRAT, the printed circuit board in 3D

Arduino code for V0p2

Size
65 × 56.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
72
Pads
183
Tracks, vias
662, 90
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Aug 2016
Updated
30 Dec 2019

Overview

RRAT is an open-source printed circuit board by opentrv, from the opentrv/OpenTRV-Arduino-V0p2 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 65 × 56.5 mm with 42 parts on 72 nets, routed with 662 tracks and 90 vias.

It is built around the ATMEGA328P-AU and MIC94092YC6-TR. Its parts include 14 capacitors, 14 resistors, 4 connectors, 3 ICs and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Build Status

This is the OpenTRV (Open-Source Thermostatic Radiator Valve) project.

See http://www.earth.org.uk/open-source-programmable-thermostatic-radiator-valve.html for more.

Contains software and hardware elements.

Note that the content of this project is available under a permissive licence, Apache 2.0 or (Solderpad 0.51 for hardware elements) unless otherwise stated, and is provided supplied AS-IS with no warranties of any kind.

Fragments of contributed code, libraries, etc, within here may have their own licences, in which case that should be explicit in each case.

Parts

42
QtyValueFootprintReferences
101KRRAT Consolidated:R0603R3, R4, R9, R10, R12, R13, R14, R15, R16, R17
6100nFRRAT Consolidated:C0603C1, C2, C3, C4, C5, C14
447pFRRAT Consolidated:C0603C7, C8, C9, C10
30nFRRAT Consolidated:C0603C11, C12, C13
34.7KRRAT Consolidated:R0603R1, R2, R5
1100uFCapacitor_SMD:C_1206_3216MetricC6
11RRRAT Consolidated:R0603R18
132768HzRRAT Consolidated:CrystalQ1
1ATmega328P-AURRAT Consolidated:TQFP32-08IC1
1Conn_01x06RRAT Consolidated:Pin_Header_Straight_1x06_Pitch2.54mmJ1
1Conn_01x12RRAT Consolidated:Pin_Header_Straight_1x12_Pitch2.54mmJ4
1Conn_02x03_Odd_EvenRRAT Consolidated:Pin_Header_Straight_2x03_Pitch2.54mmJ2
1Conn_02x20_Odd_EvenRRAT Consolidated:Pin_Header_Straight_2x20_Pitch2.54mmJ3
1MIC94092YC6sc-70-6:SOT-363_SC-70-6U2
1RFM26W-868S2RRAT Consolidated:RFM26U1
1SMD2RRAT Consolidated:SMD1,27-2,54ANT1
1SolderJumper_2_OpenRRAT Consolidated:JUMPER-SOLDER-SMDJP1

The 38 most common of 42 parts.

Similar boards

  • 2 layers50.5 × 128.5 mmOpenThereminV45, the printed circuit board in 3D

    OpenThereminV45

    GaudiLabs/OpenThereminV4

    Open Source Theremin Instrument

    107 parts249GPL-3.0
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers34 × 46 mmNfcemu, the printed circuit board in 3D

    Nfcemu

    solosky/nfc-emu

    NFC模拟器

    58 parts117Apache-2.0
  • 2 layers73 × 94 mmSportiduino base, the printed circuit board in 3D

    Sportiduino base

    sportiduino/sportiduino

    Electronic timing system for orienteering and similar outdoor sports events on Arduino

    119 parts78GPL-3.0
  • 2 layers58.9 × 44.2 mmOpenPSX2AmigaPadAdapter, the printed circuit board in 3D

    OpenPSX2AmigaPadAdapter

    SukkoPera/OpenPSX2AmigaPadAdapter

    Playstation to Commodore Amiga/CD32 Controller Adapter

    43 parts69
  • 2 layers60 × 50 mmVx8 gps prototype v2.0, the printed circuit board in 3D

    Vx8 gps prototype v2.0

    4x1md/vx8_gps

    DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.

    56 parts66MIT

Questions

How big is the RRAT PCB?

It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RRAT use?

42 parts, built around the ATMEGA328P-AU and MIC94092YC6-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RRAT KiCad files?

From the opentrv/OpenTRV-Arduino-V0p2 repository on GitHub, at the commit this page was made from: the board is Arduino/hardware/RRAT-REV19/RRAT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RRAT design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).