6 layers120 × 50 mm
Usb switch
cubicap/usb4-thing
An attemt at creating a USB4 multiplexer controlled by ESP32-S3.
65 parts
2 layers26 × 21.7 mm
OpenThermalCamera
openthermalcamera/HW-PCB39PCB for Open Thermal Camera
- Size
- 26 × 21.7 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 23
- Nets
- 14
- Pads
- 106
- Tracks, vias
- 292, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Mar 2019
- Updated
- 30 Sep 2019
Overview
OpenThermalCamera is an open-source printed circuit board by openthermalcamera, from the openthermalcamera/HW-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26 × 21.7 mm with 23 parts on 14 nets, routed with 292 tracks and 33 vias.
It is built around the NUP2202W1 and DX07P024AJ1R1500. Its parts include 6 capacitors, 6 resistors, 4 ICs, 3 connectors and 1 switch. It belongs with the STM32 boards of this library.
Main components
2README
Readme.mdOpen Thermal Camera - KiCad PCB
This repository contains KiCad source files for Open Thermal Camera PCB.
The PCB is 2 layer, thickness of 0.8mm (To accommodate the edge TypeC / MicroUSB connector)
Under releases you can find:
- Interactive BOM (.html)
- KiCost BOM (.xlsx)
- Gerbers
- Position files (.pos & .rpt)
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C5, C6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 50k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | Conn_01x05_Female | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1 |
| 1 | DX07P024AJ1R1500 | lib_fp:DX07P024AJ1R1500 | J2 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | G1 |
| 1 | MLX90640 | lib_fp:MLX90640 | U1 |
| 1 | NUP2202 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U4 |
| 1 | PB_Bootloader | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SW1 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | TPS79333-EP | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | micro5p_reversible | lib_fp:micro5p_reversible_edley_technology | J3 |
Similar boards
- 2 layers38 × 20.7 mm
JTAG HW
vanbwodonk/ft2232hl-jtag-clone
Digilent JTAG clone hardware + eeprom firmware (.bin)
38 parts73 - 4 layers58 × 38 mm
Qspimux2-prog
felixheld/qspimux
QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests
99 parts57CC-BY-SA-4.0 - 4 layers22.9 × 50.8 mm
Penguino STM32WL M
azerimaker/Penguino-STM32WL-MAMWLExx
This repo contains all the necessary design and fabrication files for the MoveSolution's MAMWLExx based Penguino STM32WL breakout board.
68 parts15 - 4 layers22.9 × 50.8 mm
Penguino Feather-4260-v1
azerimaker/Penguino-RAK4260
This repo contains all the necessary design and fabrication files for the RAK4260 based Penguino SAMR34 Feather breakout board.
60 parts8 - 2 layers50 × 50 mm
- 2 layers65 × 30 mm
Create rpi hat
OYTIS/Create2Pi
Raspberry Pi HAT for interfacing with iRobot Create Open Interface
29 parts1 - 4 layers180 × 160 mm
PCE colorlight carrier
supermomo31/PCE_colorlight_carrier
console PCE depuis un FPGA format SODIMM : colorlight i5
258 parts
Questions
How big is the OpenThermalCamera PCB?
It measures 26 × 21.7 mm and has 2 copper layers, 0.8 mm thick.
What parts does the OpenThermalCamera use?
23 parts, built around the NUP2202W1 and DX07P024AJ1R1500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenThermalCamera KiCad files?
From the openthermalcamera/HW-PCB repository on GitHub, at the commit this page was made from: the board is OpenThermalCamera.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenThermalCamera design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).