
PDU
OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware

DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware
Gateway Bridge is an open-source printed circuit board by OpenSkyHawk, from the OpenSkyHawk/OpenSkyhawk repository on GitHub. It is a 2-layer board of 98.9 × 70.1 mm with 60 parts on 79 nets, routed with 627 tracks and 149 vias.
It is built around the SN65HVD230D, AMS1117-3.3 and RP2040-ZERO, with the SMBJ12A and SMBJ6.0A among its other parts. Its parts include 17 resistors, 15 capacitors, 8 connectors, 7 diodes and 4 ICs. It belongs with the interfaces and adapters boards and the RP2040 and STM32 boards of this library.
Status: In progress — not released yet.
A board is released only once it has been built, brought up, and verified: it is then listed in PCB/manifest.yaml and ships in the next hardware release (hardware-vX.Y.Z, see the repository's Releases). The model is design decision D10; the release standard is the Releases section of docs/_source/hardware-standards.md.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C9, C12, C14 |
| 5 | 3.3k | Resistor_SMD:R_0805_2012Metric | R1, R7, R8, R9, R10 |
| 5 | 33 | Resistor_SMD:R_0805_2012Metric | R11, R12, R14, R15, R18 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | GREEN | LED_SMD:LED_0805_2012Metric | D1, D3, D5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R_BOOT1, R6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R16, R17 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | RED | LED_SMD:LED_0805_2012Metric | D2, D4 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C11 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_5x5.4 | C15 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_4x5.4 | C13 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | J_BUS_IN | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J8 |
| 1 | J_BUS_OUT | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J9 |
| 1 | J_CAN_TERM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | J_DIAG | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | J_I2C1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | J_I2C2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | J_SWD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | LOGO | LOGO | G*** |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | RP2040-ZERO | OpenSkyhawk:MODULE_RP2040-ZERO | U4 |
| 1 | SMBJ12A | OpenSkyhawk:DIOM4336X265N | D7 |
| 1 | SMBJ6.0A | OpenSkyhawk:DIOM4336X265N | D6 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STM32_Breakout | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3 |

OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware

OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware

OpenSkyHawk/OpenSkyhawk
DCS A-4E Skyhawk home cockpit — 3D-printed panels, custom PCBs, STM32/RP2040 firmware

7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.

MHVandborg/furuta_pendulum
A Furuta (rotary inverted) pendulum system controlled by a neural network running on a custom PCB.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.


mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

voltlog/esp32-aquarium-controller
ESP32 based aquarium/terrarium controller

baldengineer/Banana-Plug-Adapters
Bench Power Supply Adapters for common connectors

MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
It measures 98.9 × 70.1 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the SN65HVD230D, AMS1117-3.3, RP2040-ZERO and SMBJ12A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OpenSkyHawk/OpenSkyhawk repository on GitHub, at the commit this page was made from: the board is PCB/Base/Gateway_Bridge/Gateway_Bridge.kicad_pcb and its schematic PCB/Base/Gateway_Bridge/Gateway_Bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OpenSkyHawk before reusing the design.