
Jetson orin baseboard storage expansion
antmicro/job-storage-expansion
This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.

USB Storage is an open-source printed circuit board by onodera-g, from the onodera-g/emmc_usb_storage repository on GitHub. It is a 2-layer board of 200 × 150 mm with 50 parts on 173 nets, routed with 140 tracks and 0 vias.
It is built around the AP2112K-3.3, KLM8G1GETF-B041 and USB2642/ML, with the USBLC6-2SC6 among its other parts. Its parts include 31 capacitors, 11 resistors, 4 ICs, 1 connector and 1 crystal.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 0.1µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C43, C44, C45, C49, C50, C51, C53, C54, C56, C61, C62, C63, C64, C66, C67, C68 +4 |
| 6 | 33Ω | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R13, R16, R19, R20, R21, R22 |
| 4 | 4.7µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C52, C55, C60, C65 |
| 3 | 1.0µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C46, C70, C74 |
| 3 | 100kΩ | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R12, R14, R15 |
| 2 | 18pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C59, C75 |
| 2 | FerriteBead | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | FB1, FB2 |
| 1 | 10µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C35 |
| 1 | 12kΩ | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R17 |
| 1 | 1MΩ | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R18 |
| 1 | 1µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C57 |
| 1 | 24MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | KLM8G1GETF-B041 | KLM8G1GETF-B041:KLMBG2JENB-B041_SAM | U7 |
| 1 | USB2642/ML | USB2642:QFN48_7X7MC_MCH | U9 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J2 |

antmicro/job-storage-expansion
This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.



joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.

yuz207/agentpad13
agentpad13 — open-source 13-key macropad for agentic work (RP2040, vial-qmk, planar joystick, Raw HID agent-status protocol)

brainstorm/bbtrackball-rs
Experimenting with Blackberry trackball for keyboard ergonomics

cs2dsb/stm32-usb.rs
A dev board designed to facilitate the development of USB firmware for STM32
It measures 200 × 150 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the AP2112K-3.3, KLM8G1GETF-B041, USB2642/ML and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the onodera-g/emmc_usb_storage repository on GitHub, at the commit this page was made from: the board is USB_Storage.kicad_pcb and its schematic USB_Storage.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask onodera-g before reusing the design.