4 layers39.5 × 96.3 mm
Jetson orin baseboard storage expansion
antmicro/job-storage-expansion
This project contains open hardware design files for an expansion board compatible with Antmicro's Jetson Orin Baseboard.
110 parts4Apache-2.0
4 layers71.2 × 25 mm
USB with Screen
alexcjang/Sprite-StickMicroSD-Driven Mini USB Display Engine
- Size
- 71.2 × 25 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 60
- Pads
- 131
- Tracks, vias
- 153, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Aug 2026
- Updated
- 28 Aug 2026
Overview
USB with Screen is an open-source printed circuit board by alexcjang, from the alexcjang/Sprite-Stick repository on GitHub, published under the MIT licence. It is a 4-layer board of 71.2 × 25 mm with 18 parts on 60 nets, routed with 153 tracks and 30 vias.
It is built around the NCP114ASN330T2G, RP2040-ZERO and USB2642/ML, with the ASE-24.000MHZ-L-C-T and MEM2090-00-145-00-A among its other parts. Its parts include 4 capacitors, 3 ICs, 3 connectors, 1 resistor and 1 diode. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
5
NCP114ASN330T2G
TSOP-5-40℃~+85℃@(Tj) 1 200mV@(300mA) 3.3V 300mA 5.5V 56uA 70uVrms 75dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive TSOP-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiUncategorised
RP2040-ZERO
-- Development Boards & Kits ROHSWaveshareDevelopment Boards & Kits
USB2642/ML
QFN-481.8V 2 Hub SPI USB 2.0 QFN-48 USB HUB Controllers ROHSMicrochip TechnologyUSB ICs
ASE-24.000MHZ-L-C-T
SMD3225-4P-40℃~+85℃ 13mA 24MHz 3.3V ±50ppm SMD3225-4P Crystal Oscillators ROHSAbraconCrystal OscillatorsMEM2090-00-145-00-A
SMDSMD New Arrivals ROHSGlobal Connector Technology (GCT)Uncategorised
README
README.mdSprite-Stick
MicroSD-Driven Mini USB Display Engine built on RP2040 and USB2642
Sprite Stick is a flash drive with a screen, allowing the display of useful info or fun graphics. Designed as a sleek, self-contained 4-layer PCB, the hardware combines a high-speed USB 2.0 Hub Controller (USB2642), a Waveshare RP2040-Zero micro-controller, a MicroSD card interface, and an integrated SPI display engine.
Tools
KiCad, Arduino IDE
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_pull38, R1_39 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C46 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C48 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 12.0K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_Precision47 |
| 1 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2_39 |
| 1 | 48037-0001 | 538-48037-0001:480370001 | J1 |
| 1 | ASE-24.000MHZ-L-C-T | 815-ASE-24.000MLCT:ASE24576MHZLCT | Y1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | MEM2090-00-145-00-A | 640-MEM20900014500A:MEM20900014500A | J2 |
| 1 | NCP114ASN330T2G | LIB_NCP114ASN330T2G:SOT95P275X110-5N | IC1 |
| 1 | RP2040-ZERO | RP2040-Zero:MODULE_RP2040-ZERO | U3 |
| 1 | SESD7L5.0DT5G | LIB_SESD7L5.0DT5G:SOTFL40P120X55-3N | D1 |
| 1 | USB2642/ML | USB2642-I/ML:QFN48_7X7MC_MCH | U1 |
Similar boards
- 2 layers200 × 150 mm
- 4 layers190.5 × 160 mm
Topiary TrimBot
griffinross2/Topiary-TrimBot
Topiary TrimBot, an automatic topiary trimming robot. Purdue ECE Senior Design group E11 for 49595 in Fall 2025.
285 parts2GPL-3.0 - 2 layers140.3 × 98.7 mm
MEOW System Integration
andrewgond/M.E.O.W-Mealtime-Electronic-Observation-and-Weighing
M.E.O.W. automated pet feeder, a system that dispenses food and logs pet weight using load cells and RFID identification.
40 parts1Apache-2.0 - 2 layers33.3 × 16.8 mm
Sd card logger
griffinross2/Neo-GPS
A new version of my project to create a fully custom GPS receiver
6 parts1GPL-3.0 - 6 layers139.7 × 88.9 mm
- 2 layers
- 2 layers132.3 × 94.9 mm
Questions
How big is the USB with Screen PCB?
It measures 71.2 × 25 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USB with Screen use?
18 parts, built around the NCP114ASN330T2G, RP2040-ZERO, USB2642/ML and ASE-24.000MHZ-L-C-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB with Screen KiCad files?
From the alexcjang/Sprite-Stick repository on GitHub, at the commit this page was made from: the board is USB_with_Screen/USB_with_Screen.kicad_pcb and its schematic USB_with_Screen/USB_with_Screen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB with Screen design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).