
LVP G0S4
Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.
BlackDev G0Basic is an open-source printed circuit board by Omar-Magdy0, from the Omar-Magdy0/ForgeDriveHW repository on GitHub, published under the MIT licence. It is a 2-layer board of 73.7 × 61 mm with 25 parts on 86 nets, routed with 326 tracks and 242 vias.
It is built around the ESP32-WROOM-32E-N4, SIT65HVD230DR and AMS1117-3.3. Its parts include 10 resistors, 5 capacitors, 5 ICs and 5 connectors. It belongs with the ESP32 boards of this library.
Forged by passionate engineers.
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.
ForgeDrive is an ecosystem of reusable hardware, firmware, tools, and documentation covering the complete development process—from power electronics and embedded software to simulation, validation, and manufacturing.
The project aims to bridge the gap between academic learning, rapid prototyping, and industrial engineering practices.
Vision
ForgeDrive is built around one simple idea:
«Engineering should be understandable, modular, and reusable.»
Every hardware module, software component, and document is designed with long-term maintainability and extensibility in mind.
Whether developing a compact BLDC controller or a complete industrial servo drive, the same design philosophy applies:
##Core Principles
Modularity
Each subsystem has a single responsibility.
Examples include:
Modules should be independently testable and reusable across projects.
Scalability
ForgeDrive is designed to scale across applications.
The same architecture should support:
Engineering First
Design decisions are driven by engineering rather than trends.
Topics documented throughout the project include:
Learning by Building
ForgeDrive is intended to be as educational as it is practical.
Whenever possible, documentation explains:
The goal is to share engineering knowledge—not only finished hardware.
Project Scope
ForgeDrive currently explores technologies including:
Hardware
Embedded Software
Control
Modeling & Simulation
Mechanical
Documentation is considered a first-class component of the project.
Each hardware module includes:
Shared documentation includes:
Hardware revisions are maintained independently while Git preserves complete design history.
ForgeDrive emphasizes:
ForgeDrive is developed in the open.
The repository welcomes:
Constructive engineering feedback is always appreciated.
Some long-term goals include:
ForgeDrive contains hardware intended for development, experimentation, and learning.
Many projects involve hazardous voltages, high currents, and high-energy systems.
Always follow appropriate electrical safety practices and verify designs before use in real-world applications.
License
This repository is released under the applicable open-source license included in this project.
Please refer to the LICENSE file for details.
Acknowledgements
ForgeDrive is built through curiosity, experimentation, continuous learning, and a passion for engineering.
«Forged by passionate engineers.»
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R7, R12 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 10k | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R9, R11 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 120 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J6 |
| 1 | ESP32-WROOM-32E | EasyEDA:WIFI-SMD_ESP32-WROOM-32E | U2 |
| 1 | HX TF PUSH | EasyEDA:TF-SMD_TF-PUSH | U5 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | SIT65HVD230DR | EasyEDA:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U4 |
| 1 | ~ | libLocal:Stm32BlackPill | U1 |

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.

Omar-Magdy0/ForgeDriveHW
ForgeDrive is an open-source research and development platform for modular, scalable, and industrial-inspired systems.



PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.


ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator

RaviKachhwaha/AuraForge-50X
A 4-layer programmable PCB board audio platform featuring an ESP32 DSP core, 50Hz Wi-Fi CSI radar, 2x50W TPA3116D2 Class-D amp, hybrid dual-rail power (10A TPS61088 3.7V-to-12V boost & 12–21V DC jack), 3A USB-C fast…

realamoghm/Focus-Dial
A standalone hardware controller that allows users to enter, manage, and visualize focus states through a simple physical interaction.

It measures 73.7 × 61 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the ESP32-WROOM-32E-N4, SIT65HVD230DR and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Omar-Magdy0/ForgeDriveHW repository on GitHub, at the commit this page was made from: the board is ForgeX/BlackDev_G0Basic/BlackDev_G0Basic.kicad_pcb and its schematic ForgeX/BlackDev_G0Basic/BlackDev_G0Basic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).