

Jantteri left
- Size
- 58.8 × 63.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 59
- Pads
- 214
- Tracks, vias
- 536, 137
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Aug 2021
- Updated
- 5 Sep 2024
Overview
Jantteri left is an open-source printed circuit board by OJ2016, from the OJ2016/pcb-common repository on GitHub. It is a 2-layer board of 58.8 × 63.8 mm with 56 parts on 59 nets, routed with 536 tracks and 137 vias.
It is built around the LM2596S-5.0, W25Q128JVSIQ and AMS1117-3.3, with the AO3400A, SK32WA and 1N5819WS among its other parts. Its parts include 21 capacitors, 16 resistors, 5 connectors, 4 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
8LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSK32WA
SOD-123F-55℃~+125℃ 20V 3A 500uA@20V 550mV@3A 80A Independent SOD-123F Schottky Diodes ROHSShikuesSchottky Diodes1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsP0915N-FC15BR100K
through hole1 100kΩ 50mW ±20% through hole Potentiometers, Variable Resistors ROHSTT ElectronicsPotentiometers & Variable Resistors
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C11, C12, C20, C21 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R8, R9, R11 |
| 3 | 4K7 | Resistor_SMD:R_0402_1005Metric | R14, R15, R16 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R10, R12 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | DBG | Connector_JST2:JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J4, J5 |
| 1 | SK32WA | Diode_SMD:D_SOD-123 | D2 |
| 1 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 150K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D3 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 20K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C16 |
| 1 | 300K | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4u7 | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 680uF | Capacitor_SMD:CP_Elec_10x10.5 | C15 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Conn_01x03_Male | Connector_JST2:JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical_SMD | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | P0915N-FC15BR100K | Potentiometer_THT:Potentiometer_TT_P0915N | RV1 |
| 1 | STM32L151C8TxA | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_Push | voja-footprints:TS-1095PS-A11B3-C3D2 | SW1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
More from OJ2016/pcb-common
9- 2 layers58.8 × 63.8 mm

- 2 layers137.7 × 45 mm

- 2 layers130.2 × 51.8 mm

- 2 layers90.6 × 20.3 mm

- 2 layers40 × 80.6 mm

- 2 layers78.5 × 34.3 mm

- 2 layers79.9 × 15 mm

- 2 layers40.2 × 17.5 mm

- 2 layers60 × 39.3 mm

Similar boards
- 2 layers70 × 57 mm

- 2 layers72.9 × 60.9 mm

- 4 layers69.5 × 62.6 mm

Sensors Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
197 parts4 - 2 layers31.5 × 42 mm

- 4 layers41 × 61.6 mm

Whitefox
nxrmqlly/whitefox
A devboard based on the Raspberry Pi RP2350B, with 47 GPIO, and microSD support
80 parts1CERN-OHL-S-2.0 - 4 layers101.3 × 63.5 mm

Swyter psdaptwor psvr2-pc
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
135 parts1 - 2 layers37 × 70.9 mm

Opendiag
maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
148 parts5CERN-OHL-S-2.0 - 4 layers91.6 × 84.4 mm

Questions
How big is the Jantteri left PCB?
It measures 58.8 × 63.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jantteri left use?
56 parts, built around the LM2596S-5.0, W25Q128JVSIQ, AMS1117-3.3 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jantteri left KiCad files?
From the OJ2016/pcb-common repository on GitHub, at the commit this page was made from: the board is tuubijantteri/jantteri_left/jantteri_left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jantteri left design in my own project?
Its repository states no licence, so its author keeps all rights: ask OJ2016 before reusing the design.