2 layers137.7 × 45 mm
2 layers58.8 × 63.8 mm
Jantteri right
OJ2016/pcb-common1- Size
- 58.8 × 63.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 97
- Pads
- 342
- Tracks, vias
- 745, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Aug 2021
- Updated
- 5 Sep 2024
Overview
Jantteri right is an open-source printed circuit board by OJ2016, from the OJ2016/pcb-common repository on GitHub. It is a 2-layer board of 58.8 × 63.8 mm with 89 parts on 97 nets, routed with 745 tracks and 107 vias.
It is built around the CP2102N-A01-GQFN28R, DRV8848PWP and AP3407, with the AP3404S, 1N5819WS and ESD9B3.3ST5G among its other parts. Its parts include 31 capacitors, 30 resistors, 9 diodes, 7 transistors and 6 ICs.
Main components
11
CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
DRV8848PWP
HTSSOP-16-EP-40℃~+85℃ 2 2A 4V~18V 4V~18V 900mΩ Bipolar Driver Yes HTSSOP-16-EP Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
AP3407
SOT-23-55℃~+150℃ 1 P-Channel 1.4W 1.5V 11nC@10V 30V 4.1A 55mΩ@10V、80mΩ@4.5V 580pF 74pF 98pF P-Channel SOT-23 MOSFETs ROHSALLPOWERMOSFETs
AP3404S
SOT-23-3-55℃~+150℃ 1 N-channel 1.4W 2.5V 30V 32pF 34mΩ@4.5V 55pF 6.5A 690pF N-Channel SOT-23-3 MOSFETs ROHSALLPOWERMOSFETs
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
ESD9B3.3ST5G
SOD-923(0402)ESD And Surge Protection (TVS/ESD)TECH PUBLIC
KT-0603R
0603-40℃~+85℃ 1.6mm x 0.8mm square LED 1.8V~2.4V 120° 20mA 300mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - Discrete
ESDA25W
SOT-323-3L-40℃~+125℃ 15A 1uA 2 24V 25V 25V 400W 65pF ESD IEC 61000-4-2 Unidirectional SOT-323-3L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
KT-0805G
0805-40℃~+85℃ 100mW 120° 2.6V~3.1V 430mcd 513nm~528nm 525nm 5mA Discrete Diode Emerald Green Water Clear 0805 LED Indication - Discrete ROHSHubei KENTO ElecLED Indication - Discrete
NCP18XH103F03RB
0603-40℃~+125℃ 0.8mm 1.6mm 100mW 10kΩ 1mW/℃ 310uA 3380K 3434K 3455K ±1% ±1% 0603 NTC Thermistors ROHSMurataNTC Thermistors
SMF22CA
SOD-123FL-55℃~+150℃ 1 1uA 200W@10/1000us 22V 26.9V 35.5V 5.6A@10/1000us Bidirectional TVS SOD-123FL ESD and Surge Protection (TVS/ESD) ROHSTWGMCESD And Surge Protection (TVS/ESD)
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0u1 | Capacitor_SMD:C_0603_1608Metric | C11, C13, C17, C26, C29, C30, C31 |
| 7 | 100K | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R10, R18, R20, R29 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C9, C21, C22, C23, C24 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C16 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C7, C25, C27, C28 |
| 4 | AP3407 | Package_TO_SOT_SMD:SOT-23 | Q1, Q5, Q6, Q7 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R11, R27, R28 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R9, R19, R30 |
| 3 | AP3404S | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C1, C19 |
| 2 | 100R | Resistor_SMD:R_0402_1005Metric | R24, R26 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D2, D5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 200K | Resistor_SMD:R_0402_1005Metric | R21, R22 |
| 2 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C10, C12 |
| 2 | Conn_01x02_Male | Connector_JST2:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J2, J3 |
| 2 | ESD9B3.3ST5G | Diode_SMD:D_SOD-923 | D7, D8 |
| 2 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U6, U7 |
| 2 | KT-0603R | Diode_SMD:D_0603_1608Metric | D3, D11 |
| 1 | 0R50 | Resistor_SMD:R_2512_6332Metric | R13 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 13K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 150K | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 160K | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 22p | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 2R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 30K | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 4u7 | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 6u8 | Inductor_SMD:L_Abracon_ASPI-0630LR | L1 |
| 1 | BQ24610 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm | U3 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical_SMD | J4 |
| 1 | DRV8848 | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | U2 |
| 1 | ESDA25W | Package_TO_SOT_SMD:SOT-323_SC-70 | D9 |
| 1 | KT-0805G | Diode_SMD:D_0805_2012Metric | D4 |
| 1 | NCP18XH103F03RB | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | SMF22CA | Diode_SMD:D_SOD-123F | D6 |
| 1 | STUSB4500QTR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400 | J1 |
More from OJ2016/pcb-common
9- 2 layers130.2 × 51.8 mm
- 2 layers90.6 × 20.3 mm
- 2 layers40 × 80.6 mm
- 2 layers58.8 × 63.8 mm
- 2 layers78.5 × 34.3 mm
- 2 layers79.9 × 15 mm
- 2 layers40.2 × 17.5 mm
- 2 layers60 × 39.3 mm
Similar boards
- 4 layers90 × 60 mm
Bench psu
PaulBichl/VibePCB-bench-psu
USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.
206 parts1 - 4 layers90 × 90 mm
Aitken
b1u3-22/Aitken
A handy light that helps astronomers during night-sky observations
125 parts1MPL-2.0 - 6 layers46 × 46 mm
- 4 layers100 × 60 mm
GigaDFN56
kaminaris/GigaESC-DFN5x6
Compact, modular three-phase ESC power board for the GigaESC project. Designed in KiCad 10 on a 100 × 60 mm, four-layer PCB, with separate plug-in control and power-supply boards.
234 parts - 2 layers
- 4 layers90 × 66 mm
Power
AndreasNielsen4000/Group-7-IoT-Project
The project is a wireless speaker system that can play music from a Bluetooth or WiFi source. The system consists of four main parts with subcomponents:
119 parts1 - 4 layers64 × 43 mm
Dalws
anhldptit2610/dalws
This project is my attempt to learn about microcontroller and PCB design. Now I realize that making a full, complete electronic project is super hard.
83 parts2MIT - 4 layers53.3 × 73.7 mm
Tag breakout l432-u375-lipo v1
tag-designs/hardware
Hardware designs for tags and bases
55 parts2CERN-OHL-P-2.0
Questions
How big is the Jantteri right PCB?
It measures 58.8 × 63.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jantteri right use?
89 parts, built around the CP2102N-A01-GQFN28R, DRV8848PWP, AP3407 and AP3404S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jantteri right KiCad files?
From the OJ2016/pcb-common repository on GitHub, at the commit this page was made from: the board is tuubijantteri/jantteri_right/jantteri_right.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jantteri right design in my own project?
Its repository states no licence, so its author keeps all rights: ask OJ2016 before reusing the design.