
LED Board
b1u3-22/Aitken
A handy light that helps astronomers during night-sky observations

A handy light that helps astronomers during night-sky observations
Aitken is an open-source printed circuit board by b1u3-22, from the b1u3-22/Aitken repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 90 × 90 mm with 125 parts on 110 nets, routed with 646 tracks and 1,215 vias.
It is built around the ESP32-S3FN8, LIS3MDL and AP3031, with the MAX77972EWX+, TPD4E05U06DQAR and SD103AWSG among its other parts. Its parts include 45 capacitors, 28 resistors, 10 ICs, 6 inductors and 5 diodes. It belongs with the ESP32 boards of this library.
Aitken is small light, that was designed to help astronomers to see better during night sky observations without losing their night vision.
The name Aitken was chosen after Robert Grand Aitken who discovered the Red Rectangle Nebula. The shape of the nebula was also inspiration when creating logo for this project
Used for two-way charging with USB-PD. It can also be used to program the ESP32-S3 microcontroller inside.
Aitken features rotatory encoder that is used to either change the light intensity and to navigate the menu. Above that is small OLED screen.
Featuring accelerometer and gyroscope enables Aitken to be controlled via gestures. It also has 3-axis magnetometer.
The board has 30 LEDs with all of them being red in the 620 - 630nm range with luminous flux of around 4 lumens each.
| Status | Action | ETA |
|---|---|---|
| ✅ Done | Schematic design | Done |
| ❎ In progress | PCB design | 16.09.2024 |
| ❎ Waiting for PCB | PCB test | |
| ❎ Waiting for PCB | Firmware |
The MCU used is ESP32-S3FN8 with integrated 8MB flash, 2.4GHz Wi-Fi and Bluetooth 5.0 LE.
For accelerometer I decided to use LSM6DSOTR. The magnetometer used is LIS3MDLTR
For USB-PD controller, battery charger and power bus manager I chose MAX77972 mainly for the ability to program the charge voltage and current using resistors and the integrated battery fuel gauge. Power for lights is provided from AP3031 and 3V3 power rail is powered from NCP186
Aitken is made out of 2 separate boards. The first one has 4 layer stack up with main circutry and battery holders. The second one is 1 layer aluminium board with just the LEDs and connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R10, R11, R13, R15, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +2 |
| 10 | 0u1 | Capacitor_SMD:C_0402_1005Metric | C4, C13, C14, C17, C18, C19, C20, C23, C25, C26 |
| 6 | 0u47 | Capacitor_SMD:C_0402_1005Metric | C29, C30, C31, C32, C33, C34 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C15, C22, C36, C37, C40, C41 |
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C35, C38, C39, C42, C44 |
| 4 | 0u47 | Inductor_SMD:L_2512_6332Metric | L1, L5, L6, L7 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric | C12, C21, C43, C45 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C8, C9, C16 |
| 4 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C7 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R5, R7, R8 |
| 3 | 3R3 1% | Resistor_SMD:R_0805_2012Metric | R12, R14, R16 |
| 3 | AP3031 | LED_Drivers:AP3031 | U5, U6, U7 |
| 3 | SD103AWSG | Diode_SMD:D_SOD-323 | D2, D13, D24 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C27, C28 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C3, C24 |
| 2 | 4k42 1% | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | G*** | kibuzzard-66E4619D | kibuzzard-66E4619D, kibuzzard-66E4619D |
| 2 | Li-Ion cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 2n | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 2p | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 2p6 | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 3n3 | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 40MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 499R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | ESP32-S3FN8 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U2 |
| 1 | G*** | kibuzzard-66E45E6A | kibuzzard-66E45E6A |
| 1 | G*** | kibuzzard-66E45F18 | kibuzzard-66E45F18 |
| 1 | G*** | kibuzzard-66E46148 | kibuzzard-66E46148 |
| 1 | G*** | kibuzzard-66E45DB7 | kibuzzard-66E45DB7 |
| 1 | G*** | kibuzzard-66E4636A | kibuzzard-66E4636A |
| 1 | G*** | kibuzzard-66E46053 | kibuzzard-66E46053 |
| 1 | G*** | kibuzzard-66E45EEC | kibuzzard-66E45EEC |
| 1 | G*** | kibuzzard-66E462E1 | kibuzzard-66E462E1 |
| 1 | G*** | kibuzzard-66E4638B | kibuzzard-66E4638B |
| 1 | G*** | kibuzzard-66E45E5B | kibuzzard-66E45E5B |
| 1 | JMP_DATAMUX_DIS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | JTAG | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LED_Small | Diode_SMD:D_0603_1608Metric | D35 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U9 |
| 1 | LSM6DSOTR | Sensors:LSM6DSO | U8 |
| 1 | Lights connector | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J5 |
| 1 | MAX77972 | Battery_Chargers:MAX77972 | IC1 |
| 1 | MF-USML700/6-2 | Fuse:Fuse_1210_3225Metric | F1 |
| 1 | NCP186AMX330TAG | Linear_Regulators:NCP186AMX330TAG | U4 |
| 1 | NX3DV221GM_115 | USB_Multiplexers:NX3DV221GM | U3 |
| 1 | OLED | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | PCB Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx | SW2 |
| 1 | SMF22CA | Diode_SMD:D_SMF | D1 |
| 1 | TPD4E05U06DQA | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U1 |
| 1 | TP_CHG_IN | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | TP_CHG_STAT | TestPoint:TestPoint_Pad_D2.5mm | TP2 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | USB-C Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |

b1u3-22/Aitken
A handy light that helps astronomers during night-sky observations


CDFER/NIMRS-21Pin-Decoder
An open source 21-Pin DCC Decoder for model trains



JosueAGtz/ESP32-S3-Stick
ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides…

Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.

DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock

It measures 90 × 90 mm and has 4 copper layers, 1.57 mm thick.
125 parts, built around the ESP32-S3FN8, LIS3MDL, AP3031 and MAX77972EWX+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the b1u3-22/Aitken repository on GitHub, at the commit this page was made from: the board is Electronics/Main Board/Main Board.kicad_pcb and its schematic Electronics/LED Board/LED Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).